Dinamica Generale DG500 Skrócona instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Przyrządy pomiarowe Dinamica Generale DG500. Dinamica Generale DG500 12 stron. Feeding monitoring
Drukuj stronę
Use
5) Choose components from the list using ↓↑
and press ENTER. Type the weight and press
ENTER. Set the mixing time and press ENTER.
Repeat the operation for each component.
Press
to save the program.
6) Press ENTER to confirm the Total Programmed.
7) Type the total mixing time (minutes). Press
ENTER to confirm.
SECTION 4 ‐ How to create unloading points and unloading programs
Create / Modify unloading points.
1) Press
, select EDITING, then UNLOADING
POINTS by pressing ENTER.
2) Select the unloading point from the list then
create/modify it using ↓↑. Press ENTER to
continue
3) For editing details, see SECTION 2.
Program / Modify unloading programs.
1) Press
, select EDITING then UNLOADING
PROGRAMS by pressing ENTER.
2) Select the UNLODING PROGRAM from the list
then create/modify it using ↓↑. Press ENTER
to continue.
3) Edit/Modify the name of the UNLOADING
PROGRAM (for editing details, see SECTION 2)
4) Choose UNLOADING POINTS from the list using
↓↑ and press ENTER. Type the weight and
press ENTER. Repeat the operation for each
UNLOADING POINT.
Press
to save the program.
5) Press ENTER to confirm the Total Programmed.
Dinamica generale S.p.A.
5)
7)
1)
3)
1)
3)
5)
6)
2)
2)
4)
3
Rev A1