Pioneer CLD-900 Instrukcja obsługi - Strona 15
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odtwarzacz CD Pioneer CLD-900. Pioneer CLD-900 36 stron. Compact disc/ laservision player
Również dla Pioneer CLD-900: Instrukcja obsługi (36 strony)
Drukuj stronę
@ POWER
@ DISC TABLE
After turning on the POWER switch, press the EJECT button
and the disc table will open slightly towards the front.
Then, pull the disc table out by hand to load discs.
@) PHONES jack
Connect stereo headphones here.
@ PHONES LEVEL
Use to control the volume level of headphones connected to
the PHONES jack.
@G) AUTO
REPEAT ON/OFF switch
When set to ON, repeat playback of one side of the disc will
be performed. When set to OFF, disc rotation will stop after
one side of the disc has been played.
@® VIDEO DISC AUDIO:
AUTO
DIGITAL/ANALOG
ONLY
This switch is used to select the audio mode when playing
back LaserVision with Digital Sound Discs. By setting this
switch appropriately, the audio output from the rear panel
"AUDIO OUTPUT
1" terminals can be switched between
Digital Sound and Analog Sound.
AUTO DIGITAL
When set to this position, if playing back the LaserVision
with Digital Sound Discs, those Digital Sound will be re-
produced.
When
playing back the LaserVision
Discs recorded with
Analog Sound only, the Analog Sound will be reproduced.
ANALOG
ONLY
No matter what the LaserVision disc (with Digital Sound or
not), the Analog Sound signals only will be played back.
This selector switch is unrelated to the rear panel "AUDIO OUT-
PUT 2" terminals since those terminals constantly output Analog
Sound signals only.
@ PLAY >»
Press to begin playback.
EJECT 4
Press to stop playback and remove a loaded disc. The disc
_ table will open slightly to the front.
@) REMOTE CONTROL receiver
The infrared signals from the remote control unit are received
here.
.
REMOTE CONTROL indicator
This indicator lights when the remote control unit's buttons
are pressed.
PANEL
FACILITIES
@) EXTENDED
PLAY DISC indicator
This indicator lights automatically when
playing extended
play (CLV) discs.
@ VDP AUDIO MONITOR indicator
Indicates the audio output channel (1/L, 2/R) when playing
LaserVision discs.
@ CX SYSTEM
Use for turning the CX noise reduction system ON and OFF
(see page 20).
TV SELECT
Use for switching between LaserVision disc or Compact Disc
playback and VHF television broadcast reception. When the
indicator
goes
out,
LaserVision
disc or
Compact
Disc
playback
is possible;
when
lit, TV
broadcasts
can
be
watched.
[INDICATOR SECTION]
@® A-—B (interval) REPEAT indicator
Lights when performing repeat play of an interval between
two selected points.
TRACK REPEAT indicator
Lights when performing repeat playback of a single track on
a Compact Disc.
@ Numeric display (CHAP./TRACK)
When
playing
back
a
LaserVision
disc,
displays
the
"chapter" number presently being played back.
When
playing back a Compact Disc, displays the "track"
number presently being played back.
When playing back LaserVision discs without recorded chapter
numbers, no chapter numbers are displayed.
DIGITAL indicator
Lights when playing LaserVision with Digital Sound Discs,
or when playing Compact Discs.
PLAY indicator
Lights when the player is in the play mode. When time is re-
quired between the pressing of the button and actual begin-
ning of playback (for example, when first beginning play, or
when performing search), this indicator will flash during that
interval.
PAUSE indicator
Lights to indicate player is in the pause mode.
OST
RETE
SS
ERROR
ESET
ETSI
PRS
RRA
RENT
TITER
a
os sas
——
eT F S
ARES
INSEE
SESS
ESET
ES
ET
SSS
SF
ES
SESS
SL
SS OIE
SS
ZEST
EES
SEER
RTE
LOSI
ESSERE
Sn SRE
R ERNE
a
_ ses
at
RE RIOTS
RASTA
R N A S E