Pioneer DEH-6400BT Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odtwarzacz CD Pioneer DEH-6400BT. Pioneer DEH-6400BT 25 stron. Cd rds receiver
Również dla Pioneer DEH-6400BT: Instrukcja obsługi (36 strony), Skrócona instrukcja obsługi (8 strony)

Drukuj stronę
Pioneer DEH-6400BT Instrukcja obsługi
Section
02
Operating this unit
As the signal from your cellular phone may
cause noise, avoid using it when you are lis-
tening to songs on your Bluetooth audio
player.
When a call is in progress on the cellular
phone connected to this unit via Bluetooth
wireless technology, the sound of the
Bluetooth audio player connected to this unit
is muted.
When the Bluetooth audio player is in use,
you cannot connect to a Bluetooth telephone
automatically.
Playback continues even if you switch from
your Bluetooth audio player to another
source while listening to a song.
Even though your audio player does not contain
a Bluetooth module, you can still control it from
this unit via Bluetooth wireless technology using
a Bluetooth adapter (sold separately).
Setting up for Bluetooth audio
Before you can use the Bluetooth audio function
you must set up the unit for use with your
Bluetooth audio player. This entails establishing
a Bluetooth wireless connection between this
unit and your Bluetooth audio player, and pair-
ing your Bluetooth audio player with this unit.
Basic operations
Fast forwarding or reversing
1 Press and hold c or d.
Selecting a track
1 Press c or d.
Starting playback
1 Press BAND/ .
Function settings
1
Press M.C. to display the main menu.
10
En
2
Turn M.C. to change the menu option
and press to select FUNCTION.
3
Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
PLAY (play)
1 Press M.C. to start playback.
STOP (stop)
1 Press M.C. to stop the playback.
PAUSE (pause)
1 Press M.C. to turn pause on.

Phone menu operation

Important
Be sure to park your vehicle in a safe place and
apply the parking brake when performing this
operation.
1
Press
to display the phone menu.
2
Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
MISSED (missed call history)
DIALED (dialed call history)
RECEIVED (received call history)
1 Press M.C. to display the phone number list.
2 Turn M.C. to select a name or phone number.
3 Press M.C. to make a call.
When you find a phone number that you
want to store in memory, press and hold
one of the preset tuning buttons (1 to 6).
Press one of preset buttons 1 to 6 to recall
the desired preset number.
Operating this unit
PHONE BOOK (phone book)
The phone book in your cellular phone will be
transferred automatically when the phone is
connected to this unit.
Depending on the cellular phone, the phone
book may not be transferred automatically. In
this case, operate your cellular phone to trans-
fer the phone book. The visibility of this unit
should be on. Refer to VISIBLE (setting the visi-
bility of this unit) on the previous page.
1 Press M.C. to display SEARCH (alphabetical
list).
2 Turn M.C. to select the first letter of the name
you are looking for.
Press and hold M.C. to select the desired
character type.
3 Press M.C. to display a registered name list.
4 Turn M.C. to select the name you are looking
for.
5 Press M.C. to display the phone number list.
6 Turn M.C. to select a phone number you want
to call.
When you find a phone number that you
want to store in memory, press and hold
one of the preset tuning buttons (1 to 6).
Press one of preset buttons 1 to 6 to recall
the desired preset number.
7 Press M.C. to make a call.
PRESET1-6 (preset phone numbers)
1 Press M.C. to display the setting mode.
2 Use M.C. to select the desired preset number.
Turn to change the menu option. Press to se-
lect.
You can also press one of the preset num-
ber buttons 1 to 6 to select a number.
3 Press M.C. to make a call.
PHONE FUNC (phone function)
You can set A. ANSR and R.TONE from this menu.
For details, refer to Function and operation on this
page.

Function and operation

1
Display PHONE FUNC.
Refer to PHONE FUNC (phone function) on this
page.
2
Press M.C. to display the function menu.
3
Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
A. ANSR (automatic answering)
1 Press M.C. to turn automatic answering on or
off.
R.TONE (ring tone select)
1 Press M.C. to turn the ring tone on or off.
PB INVT (phone book name view)
1 Press M.C. to switch between the lists of
names.

Audio adjustments

1
Press M.C. to display the main menu.
2
Turn M.C. to change the menu option
and press to select AUDIO.
3
Turn M.C. to select the audio function.
After selecting, perform the following proce-
dures to set the audio function.