Ariston MARGHERITA Instrukcja instalacji i użytkowania - Strona 26

Przeglądaj online lub pobierz pdf Instrukcja instalacji i użytkowania dla Spryskiwacz Ariston MARGHERITA. Ariston MARGHERITA 32 stron.
Również dla Ariston MARGHERITA: Instrukcja instalacji i użytkowania (32 strony), Instrukcja instalacji i użytkowania (16 strony)

Drukuj stronę

ARGHERITA

The washing machine

does not drain or

spin.

Does

the

selected

programme foresee water

draining? Some wash cycles

require enabling the draining

manually.

Is the Anti-crease"

function -where provided -

enabled? This function require

enabling the draining

manually.

Is the drain pump clogged?

To check it, close the tap,

unplug the washing machine

and follow the instructions on

page 25, or call for technical

assistance.

Always get

assistance from

authorised

technicians and

always insist on

original spare

parts.

Technical characteristics

AB 103 M

Model

width 59,5 cm

Dimensions

height 85 cm

depth 52,5 cm

from 1 to 5 kg

Capacity

voltage 220/230 Volt 50 Hz

Electrical

maximum absorbed power 1850 W

connections

maximum pressure 1 MPa (10 bar)

Water

minimum pressure 0,05 MPa (0,5 bar)

connections

drum capacity 40 litre

up to 1000 rpm

Spinning speed

programme 3; temperature 60°C; press Extra economy button; carried out with 5 kg load.

Control programs

in compliance

with IEC

regulation 456

This appliance conforms with the following E.E.C. directives:

- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent modifications

- 89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent modifications

TS 2004 EN 60335-2-7

Margherita - Instructions for installation and use

All manuals and user guides at all-guides.com

Is the drain hose bent? The

tract of the drain hose must be

as straight as possible. Make

sure it is not squashed or bent.

Is the washing machines

drain duct clogged? Is there

an extension of the drain

hose? If so, is it positioned

incorrectly, blocking the water

flow?

The washing machine

vibrates too much

during the spin cycle.

Has the internal floating

unit been correctly

unblocked

during

installation? See the

following page on installation

procedures.

Has the washing machine

been levelled correctly? The

levelling of the appliance

should

checked

periodically. In time, the

machine

could

move

imperceptibly. Adjust the feet

and check them with a level.

Is the appliance closed in

between furniture and a

wall? If it is not a built-in

model, the washing machine

needs to oscillate a bit during

the spin cycle. A few cm of

space should therefore be left

around it.

The washing machine

leaks.

Is the metal ring of the inlet

hose properly attached?

Close the tap, unplug the

appliance and try tightening its

attachment without forcing it.

Is the detergent dispenser

obstructed? Try extracting it

and washing it under tap

water.

Is the drain hose well

attached? Close the tap,

unplug the appliance and try

tightening its attachment.

Too much foam.

Is the detergent appropriate

for machine washing? Check

whether its label reads the

definition for machine wash

or hand and machine wash,

or other similar indications.

Is the correct amount being

used? An excessive amount of

detergent, besides producing

too much foam, does not

guarantee a more effective

wash, and causes scaling in the

internal parts of the appliance.

If, despite all checks, the

washing machine fails to

function and the problem

persists, call your nearest

authorised Customer Service

Centre, providing the following

information:

- the type of malfunctioning

- the model type no. (Mod. ....)

- the serial number (S/N ....)

These indications can be found

on the data plate situated on the

back of the washing machine.