Pioneer PD-F908 Instrukcja obsługi - Strona 19

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odtwarzacz CD Pioneer PD-F908. Pioneer PD-F908 20 stron. File-type compact disc player
Również dla Pioneer PD-F908: Instrukcja serwisowa (8 strony)

Drukuj stronę

TROUBLESHOOTING

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the

points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used.

If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest PIONEER authorized service center or your dealer

to carry out repair work.

Symptom

No sound

When playback is started, it

stops immediately.

Pauses or stops during playback.

Remote control will not func-

tion.

Abnormal functioning of this unit may be caused by static electricity, or other external interference. To restore normal operation, unplug the AC power

cord and then plug it in again.

SELF-DIAGNOSTICS FUNCTION

The unit incorporates a self-diagnostic function.

When an abnormality is detected during operation of the unit, an error message (service no.) appears on the unit's display automatically. Treat the

error by following the instructions in "Countermeasures".

Display on the unit

Service No.

If the same display appears again, there may be an error in the mechanical section. When requesting servicing, please also let us know the

service number displayed on the unit.

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as

this could cause a short circuit or an electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never

make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged

power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest

PIONEER authorized service center or your dealer for a replacement.

Cause

÷ Output cables are connected incorrectly or loosely.

÷ Incorrect operation of stereo amplifier.

÷ Pin plugs and/or amplifier terminals are dirty.

÷ Player is in pause mode.

÷ The disc is loaded with the label side rightward.

÷ Disc is inserted in the wrong way.

÷ Smudges, etc., on the disc.

÷ Dead batteries.

÷ Obstruction between player and remote control

unit.

DISC

TRACK

MIN

Unit Status

The disc may not be loaded properly in the rack.

There is an operation error in the mechanical section.

There is an error related to the hood.

÷ Connect properly.

÷ Check the settings of amplifier switches and

sound volume controls.

÷ Clean away dirt.

÷ Press 3 or 8.

÷ Reload the disc with the label side leftward.

÷ Insert the disc correctly with the label side

leftward.

÷ Clean the smudges from the disc and then play

it again.

÷ Replace batteries.

÷ Relocate remote control unit or remove ob-

struction.

SEC

÷ Reload the discs properly.

(Insert only one disc in a slot.)

÷ Check if there is a foreign object attached onto

the disc.

÷ Check if there is a foreign object in the rack.

÷ Unplug the power cord then plug it in again.

÷ Check if the hood is caught by anything.

÷ Unplug the power cord then plug it in again.

Remedy

Countermeasures