AEONS Technologies SA 22 Series Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Obudowa AEONS Technologies SA 22 Series. AEONS Technologies SA 22 Series 8 stron. Wall-mounted enclosure
Assembly Steps
Step 2:
Install Top Panel and Frames
Place the Top Panel (#1) on a flat surface. Turn the
assembly over and insert it into the top panel.
Ensure that the Top and Bottom Panels (#1 and
#2) are oriented in the same direction.
Overlay the Horizontal rail (#6) so that the
notches interlay with large flanges on
the Front and Rear Frames (#3). Be sure to
orient the Horizontal rail (#6) so that
the flat, cage nut surface is facing inward.
Attach with 8x M8 Hexagon Screws and 8x M8
Flange Nuts.
Step 1:
Install Bottom Panel and Frames
Lay down Bottom Panel (#2) on a flat surface.
insert Front and Rear Frames (#3) with large
flange oriented to the inside. Ensure that the slots
in the center of the frames are facing inward as
shown in the detailed view.
Overlay the Horizontal rail (#6) so that the notches
interlay with large flanges on the Front and Rear
Frames (#3). Be sure to orient the Horizontal rail
(#6) so that the flat, cage nut surface is facing
inward.
Attach with 8x M8 Hexagon Screws and 8x M8
Flange Nuts.