Pioneer PD-M427 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odtwarzacz CD Pioneer PD-M427. Pioneer PD-M427 40 stron. Multi compact disc player
Również dla Pioneer PD-M427: Instrukcja obsługi (28 strony), Instrukcja serwisowa (32 strony), Instrukcja serwisowa (32 strony), Instrukcja serwisowa (32 strony), Instrukcja obsługi (40 strony)

Drukuj stronę
Pioneer PD-M427 Instrukcja obsługi

TO PLAY ONLY DESIRED TRACKS/DISCS

MULTI COMPACT DISC PLAYER
'
STANDBY/ON
EJECT
-DISC
MULTI CD
0
1,4
PROGRAM
1
(PD-M427 only)
2
(PD-M427 only)
DISC
TRACK/MANUAL
3
(PD-M427 only)
41 ¡¢
4
PROGRAM
6
(PD-M427 only)
PLAY/PAUSE
6
DISC
TRACK
MIN
SEC
RANDOM
HI–LITE
REPEAT PROGRAM
DISC
TRACK/MANUAL
STOP PLAY/PAUSE
4 1
¡
¢
7
6
1-BIT•DLC
DIRECT LINEAR CONVERSION
3
6
2
PROGRAM
DISC 1 DISC 2 DISC 3
DISC 4 DISC 5
DISC 6
4
¢
PROGRAM
3
PROGRAM PLAYBACK - TO PROGRAM
TRACKS/DISCS IN DESIRED ORDER
1. With the player stopped, press the PROGRAM
button, so that the PROGRAM indicator lights.
2. Use the DISC button or one of the DISC NUMBER
(DISC 1-DISC 6) buttons to select the desired disc
number.
The selected disc number will be displayed.
3. Then, press the 4 1 or ¡ ¢ button to
select the desired track.
The selected track number will be displayed.
4. Finally press the PROGRAM button, or wait for
about two seconds; the program will be stored in
memory.
If the PROGRAM button is pressed after selecting only
the disc number, the "AL" indicator will appear, indicating
selection of the "Disc All Program" mode (the entire
contents of the disc is entered into the program as a single
step).
While the "AL" indicator is displayed, however, if the 4
1 or ¡ ¢ button is used to designate a track number
and the PROGRAM button is then pressed (or after two
seconds elapses), the selected track will be stored as that
program step.
5. Repeat steps 2, 3 and 4 to program other tracks.
6. Press the 6 button.
The tracks are played in the programmed order. When all
programmed tracks have been played, the player enters
stop mode.
NOTE:
When a track is selected with the 4 1 or ¡ ¢ button
in step 3, the displayed track number is automatically
programmed if the 4 1 or ¡ ¢ button is not pressed
within 2 seconds. Therefore, be sure to press the 4 1 or
¡ ¢ button sequentially until the desired track number
appears on the display.
To stop Program playback, press the 7 button.
To exit program mode:
During program playback, select a DISC number with the
DISC NUMBER button and then press the 6 button. The
player enters normal playback mode and playback starts from
the beginning of the selected disc.
÷ Programs containing up to 32 steps can be created.
÷ To go to the previous or next step in a program, press the
4 1 or ¡ ¢ button.
÷ If the magazine is in the player, the program contents will
not be erased even if the power is turned off.
NOTE:
During Delete programming the PROGRAM button cannot
be operated.
11
En