Pioneer PD-M431 Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odtwarzacz CD Pioneer PD-M431. Pioneer PD-M431 18 stron. Multi-play compact disc player
Również dla Pioneer PD-M431: Instrukcja obsługi (19 strony)
Drukuj stronę
CONNECTIONS
@ Make sure that all of the components are turned off before making connections.
White
Output cable
CD player
Power cord
Control cord
CD-DECK SYNCHRO cord
Making connections
[1] Connect the OUTPUT jacks of this unit to the input jacks (CD
or AUX) of the amplifier.
Make sure that the white plugs are
connected to the left (L) jacks and the red plugs to the right (R)
jacks.
e@ Be sure not to connect this unit to the amplifier's PHONO
jacks, as sound will be distorted and normal playback will not
be possible.
[2]Connect the power cord to a household AC wall outlet or an
AC outlet on your amplifier.
@
Make sure plugs are inserted fully into the jacks and wail outlet.
CD-Deck synchro function
If you have a Pioneer cassette deck provided with the CD-Deck
synchro function, connect the CD-DECK SYNCHRO jacks of the
CD player and cassette deck. With this function, synchro recording
can be carried out between player and deck.
@
For details on connections and operation, refer to the instruction
manual supplied with the cassette deck.
@ The CD-DECK
SYNCHRO
cord is not supplied with the CD
player.
6
<PRB1124>
En
Stereo amplifier
Cassette deck
System
remote
contro!
with
a Pioneer
stereo
amplifier that has the §@] mark
(Available with the PD-M430/PD-M431
and U.S. and Canadian
models of the PD-M435 only)
When a Pioneer stereo amplifier bearing the
mark is used,
connect the CONTROL IN jack on the rear panel of the CD player
to the CONTROL OUT jack of the amplifier.
This will enable the
CD player to be controlled using the remote control unit supplied
with the stereo amplifier.
If you do not plan to use this feature, it
is not necessary to connect CONTROL IN/OUT jacks.
e
The control cord is supplied with the CD player.
e@ The remote
contro! unit supplied with the amplifier can be
used to control Play, Stop, Pause, Track/Disc Search and Disc
Change operations.
@
For instructions regarding connections and operation, refer to
the operating instruction manual
provided with your stereo
amplifier.
NOTES:
@
When a control cord is connected to the player's CONTROL IN
Jack, direct control of the player with the remote control unit is
not possible.
Operate the player with the remote control unit
by aiming it at the amplifier.
e@ Be sure to connect both of the control cord's plugs securely to
the CONTROL IN and CONTROL OUT terminals. Do not connect
only one end of the cable.