Pioneer PD-S703 Instrukcja serwisowa - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Odtwarzacz CD Pioneer PD-S703. Pioneer PD-S703 29 stron.
Również dla Pioneer PD-S703: Instrukcja serwisowa (30 strony)
Drukuj stronę
PD-S703
1.6 ADJUSTMENTS
@ Adjustment Methods
If a disc player is adjusted incorrectly or inadequately, it may malfunction or not work at all even though there is
nothing at all wrong with the pickup or the circuitry. Adjust correctly following the adjustment procedure.
@ Adjustment Items/Verification Items and Order
If the specified values cannot be obtained or no adjustment is possible by performing the verifications or adjustments
described in steps 1 — 4, the pickup block may be defective.
Focus offset verification
TP1, Pin6(FCS. ERR)
Tracking error balance verification
TP1, Pin2(TRK. ERR)
Pickup radial/tangential direction tilt
TP1, Pin I (RF)
Radial ni adjustment screw,
adjustment
Tangential tilt adjustment screw
TP1, Pin S(FCS. IN)
|
t
Vv
3
Focus servo loop gain adjustment
TPI, Pin 6(FCS. ERR)
R152 (FCS. GAN)
.
TP, Pin3(TRK. IN)
Tracking servo loop gain adjustment
TPI, Pin 2(TRK. ERR)
VRI51 (TRK. GAN)
@ Abbreviation table
FCS. ERR © :Focus Error
TRK. ERR
:Tracking Error
FCS GAN _ :Focus Gain
TRK GAN_:
Tracking Gain
FCS. IN
:Focus In
TRK.IN
— :Tracking In
@ Measuring Instruments and Tools
1. Dual trace oscilloscope (10:1 probe)
2. Low-frequency oscillator
3. Test disc (YEDS - 7)
4. Low pass filter (39k Q +0.001 uw F )
5. Resistor (100 kQ )
6. Standard tools