Pioneer PD-T303 Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odtwarzacz CD Pioneer PD-T303. Pioneer PD-T303 16 stron. Twin-tray compact disc player
Drukuj stronęCAUTIONS
REGARDING
HANDLING
CARE OF DISCS
With this player, use discs which display the mark shown be-
low. (Optical audio digital discs.)
Ose
DIGITAL AUDIO
& When hoiding discs, do not touch their signal surfaces, Hold the
edges, or one edge and the center hole.
@ Do not affix labels or adhesive tape to the label surfaces. Also,
do not scratch or damage the label.
@ Discs rotate at high speed inside the player. Do not use damaged
(cracked or warped} discs.
CLEANING DISCS
® The presence of fingerprints or smudges on the surface of the
disc will not directly affect the recorded signals; but depending
on the degree of contamination,
the brightness of the light
reflected from the signal surfaces may
be reduced,
causing
degradation of sound quality.
Always keep your discs clean by wiping them gently with a soft
cloth from the inner edge toward the outer perimeter.
® lf a disc becomes
very dirty, wet a soft cloth in water.
After
wringing it out well, wipe the dirt away gently, and then remove
any water.drops with another soft dry cloth.
® Do not use record cleaning sprays or anti-static agents.on discs.
Also, never ciean discs with benzene, thinner, or other voiatile
solvents which
may
cause damage
to the disc surface.
Record
cleaning
sprays
Thinner}:
Benzene
STORING DISCS
@ Discs are made of the same kinds of plastic used for conven-
tional analog audio records.
Be careful not to allow discs to warp;
always store discs in thei cases vertically, avoiding locations
with high heat or humidity.
or extremely low temperatures. Avoid
leaving discs in cars and on the seats being exposed to direct
sunlight since this can be harmful
@ Always read and abide by the precautionary notes listed on the
disc iabels.
CLEANING THE PLAYER
To clean the front panel and unit housing, wipe with a soft, dry
cloth. For stubborn dirt, wet a soft cloth with a mild detergent so.
lution, wring well, then wipe off the dirt. Also use a dry cloth to
wipe the surface dry. Do not use volatile liquids such as benzene
or thinner which
are harmful
to the unit.
?
<PRE1O81>