Pioneer Super Tuner IIID DEH-P5800MP Instrukcja obsługi - Strona 31
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odtwarzacz CD Pioneer Super Tuner IIID DEH-P5800MP. Pioneer Super Tuner IIID DEH-P5800MP 38 stron. Owner's manual
Również dla Pioneer Super Tuner IIID DEH-P5800MP: Instrukcja instalacji (6 strony), Instrukcja obsługi (34 strony)
Drukuj stronę
Initial Settings
Setting the rear output and subwoofer controller
This unit's rear output (rear speaker leads output) can be used for full-range speaker
(R-SP : FUL) or subwoofer (R-SP : S/W) connection. If you switch the rear output
setting to R-SP : S/W, you can connect a rear speaker lead directly to a subwoofer
without using an auxiliary amp.
Initially, the unit is set for rear full-range speaker connection (R-SP : FUL). When rear
output is connected to full range speakers (when R-SP : FUL is selected), you can
connect the RCA subwoofer output to a subwoofer. In this case, you can select
whether to use the subwoofer controller's (low pass filter, phase) built-in P/O:S/W or
the auxiliary P/O:FUL.
1. Press FUNCTION to select R-SP.
Press FUNCTION repeatedly until R-SP appears in the display.
2. Press 8 or 2 to switch the rear output setting.
Pressing 8 or 2 will switch between R-SP : FUL (full-range speaker) and R-SP : S/W
(subwoofer) and that status will be displayed.
• When no subwoofer is connected to the rear output, select R-SP : FUL.
• When a subwoofer is connected to the rear output, set for subwoofer R-SP : S/W.
• When the rear output setting is R-SP : S/W, you cannot change the subwoofer
controller.
3. Press 4 or 6 to switch the subwoofer output or non fading output.
Pressing 4 or 6 will switch between P/O:S/W and P/O:FUL and that status will be
displayed.
Notes
• Even if you change this setting, there is no output unless you turn the nonfading output (refer
to "Using nonfading output" on page 28) or subwoofer output (refer to "Using subwoofer
output" on page 28) in the audio menu on.
• If you change the subwoofer controller, subwoofer output and nonfading output in the audio
menu return to the factory settings.
Other Functions
Switching the display illumination
You can change the color of the display illumination.
* Press ILLUMINATION.
ILL:CHG appears in the display.
Each time you press ILLUMINATION the color changes:
RAINBOW(rainbow) – WHITE(white) – SKYBLUE(sky blue) – O-Blue(ocean blue) –
DEEPBLUE(deep blue) – PINK(pink) – RED(red) – AMBER(amber) –
ORANGE(orange) – GREEN(green) – P-GREEN(pure green)
Note
• RAINBOW setting cycles continuously through all the colors.
Switching the button illumination
You can change the color of the button illumination.
1. Press ILLUMINATION and hold until KEY:CHG appears in the display.
2. Press ILLUMINATION to select a button illumination color.
Each time you press ILLUMINATION the color changes:
WHITE(white) – SKYBLUE(sky blue) – O-Blue(ocean blue) – DEEPBLUE(deep blue)
– PINK(pink) – RED(red) – AMBER(amber) – ORANGE(orange) – GREEN(green) –
P-GREEN(pure green)
Notes
• When the color of the display illumination is set to RAINBOW, the button illumination is
changed to RAINBOW simultaneously. If you want to change the button illumination,
change the display illumination to colors other than RAINBOW, and then operate the button
illumination function.
• It is not possible to swich from the display illumination setting to the button illumination
setting directly. First press BAND to return to the normal display, then try again.
31