Pioneer 490V-S Instrukcja obsługi - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odtwarzacz DVD Pioneer 490V-S. Pioneer 490V-S 48 stron. Pioneer operating instruction dvd player dv-393-s dv-490v-s

Drukuj stronę

Connecting up

• The arrow on the cable connector body

should be face up for correct alignment

with the connector on the player.

Note

• This unit has been designed to be

compliant with HDMI (High Definition

Multimedia Interface) . Depending on the

component you have connected, using a

DVI connection may result in unreliable

signal transfers.

• When you change the component

connected to the HDMI output, you will

also need to change the HDMI settings to

match the new component (see HDMI Out

on page 35, HDMI Resolution on page 36

and HDMI Color on page 36 to do this).

However, the settings for each component

are then stored in memory (for up to 2

components).

• The HDMI connection is compatible with

44.1 kHz/48 kHz, 16 bit/20 bit/24 bit 2

channel linear PCM signals, as well as

Doldy Digital, DTS and MPEG audio

bitstream.

About HDMI

HDMI (High Definition Multimedia Interface)

supports both video and audio on a single

digital connection for use with DVD players,

DTV, set-top boxes, and other AV devices.

HDMI was developed to provide the

technologies of High Bandwidth Digital

Content Protection (HDCP) as well as Digital

Visual Interface (DVI) in one specification.

HDCP is used to protect digital content

transmitted and received by DVI-compliant

displays.

HDMI has the capability to support standard,

enhanced, or high-definition video plus

standard to multi-channel surround-sound

audio. HDMI features include uncompressed

digital video, a bandwidth of up to 2.2 gigabytes

per second (with HDTV signals), one connector

(instead of several cables and connectors), and

communication between the AV source and

AV devices such as DTVs.

HDMI, the HDMI logo and High-Definition

Multimedia Interface are trademarks or

registered trademarks of HDMI licensing LLC.

Resetting the output resolution to the

default setting with HDMI connection

Switch the player to standby then, using the

front panel controls, press

while pressing

to switch the player back to

576P/480P.

STANDBY/ON

DV-490V

STANDBY/ON