Pioneer Elite DV-58AV Instrukcja obsługi - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odtwarzacz DVD Pioneer Elite DV-58AV. Pioneer Elite DV-58AV 48 stron. Pioneer dv-58av: user guide
Również dla Pioneer Elite DV-58AV: Specyfikacje (2 strony), Specyfikacje (2 strony)
Drukuj stronę
Connecting to an AV receiver
You can connect this player to your AV receiver using the
multichannel analog outputs or one of the digital outputs.
In addition to these connections, you should also connect the 2
channel analog outputs for compatibility with all discs.
You'll probably also want to connect a video output to your AV
receiver. You can use any of the video outputs available on this
player (the illustration shows a standard (composite) connection).
1
Connect the analog AUDIO OUT (2ch) and VIDEO OUT jacks
on this player to a set of analog audio and video inputs on your
AV receiver.
To audio inputs
To video inputs
AV receiver
2
Connect the AV receiver's video output to a video input on
your TV.
You can also use the S-Video or component video jacks to connect
to the AV receiver if you prefer.
Tip
• You usually have to connect the same kind of video cable
between your DVD player and AV receiver, and between your AV
receiver and TV.
Connecting the multichannel analog outputs
If your AV receiver has 5.1 channel analog inputs, we recommend
connecting this player to it using the multichannel analog outputs.
Doing this will ensure that you can enjoy all kinds of disc, including
Dolby Digital and DTS DVD-Video discs, as well as high sampling
rate and multichannel DVD-Audio and SACD discs.
•
Connect the multi-channel audio outputs on this player to
the multi-channel audio inputs on your AV receiver.
It's convenient to use three stereo audio cables; one for the FRONT,
one for the SURROUND and one for the CENTER and SUBWOOFER
channels.
To multi-channel audio inputs
AV receiver
You can also use the S-Video or component video jacks to connect
to the AV receiver if you prefer.
Tip
• After connecting up and switching on, you should change the
Audio Output Mode setting (page 36) in the Initial Setup menu
from the default 2 Channel to 5.1 Channel.
Connecting the digital output
This player has both optical and coaxial-type digital audio outputs
for connection to an AV receiver. Connect whichever is convenient.
Depending on the capabilities of your AV receiver, you might have to
set up this player to output only digital audio in a compatible format.
See Digital Audio Out settings on page 32 and refer to the operating
instructions that came with your AV receiver.
Note that SACD audio is not output through these jacks, so this
connection should be in addition to, rather than instead of, a 5.1
channel analog connection.
•
Connect one of the DIGITAL AUDIO OUT (COAXIAL/
OPTICAL) jacks on this player to a digital input on your AV
receiver.
To coaxial/optical digital input
AV receiver
For an optical connection, use an optical cable (not supplied) to
connect the DIGITAL AUDIO OUT OPTICAL jack to an optical input
on your AV receiver.
For a coaxial connection, use a coaxial cable (similar to the supplied
video cable) to connect the DIGITAL AUDIO OUT COAXIAL jack to
a coaxial input on your AV receiver.
02
13
En