Pioneer PDP-S09-LR Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System głośników Pioneer PDP-S09-LR. Pioneer PDP-S09-LR 29 stron. Pioneer speaker system operating instructions pdp-s09-lr

Drukuj stronę

1. Connecting the Speaker Cables

CABINET MAINTENANCE

÷ Use a polishing cloth or dry cloth to wipe off dust and

dirt.

÷ When the cabinet is very dirty, wipe with a soft cloth

moistened with water-diluted cleanser; then wipe again

with a dry cloth. Do not use furniture wax or cleaners.

They may damage the surface of the cabinet.

÷ Never use thinner, benzine, insecticide sprays and other

chemicals on or near the cabinets, since these will cor-

rode the surfaces.

÷ When a chemical cloth is used, read the cautions for the

chemical cloth carefully.

SPECIFICATIONS

Cabinet : Enclosed type

Used speakers (two-way system) :

Woofer (for low tones) ............................ Oval cone type

Tweeter (for high tones) .................... 2.5 cm dome type

Nominal impedance ..................................................... 8

Frequency Range ..................................... 60 to 20,000 Hz

Sensitivity ................................ 82 dB/W (at 1 m distance)

Permissible input :

Max. input ............................................................... 12 W

Rated input .............................................................. 4 W

Crossover frequency ................................................ 3 kHz

External Dimensions ....... 74 (W) x 630 (H) x 101 (D) mm

Weight ..................................................................... 1.6 kg

Accessory parts (for 2 speakers)

.............................................................. Speaker cable x 2

............... Speaker mounting fittings (for top left side) x 1

............. Speaker mounting fittings (for top right side) x 1

....................... Speaker mounting fittings (for bottom) x 2

...................................... Flat countersunk head screw x 4

....................................... Hexagon socket head screw x 4

..................................... Mounting tool

................................................ Operating Instructions x 1

NOTE:

Specifications and design subject to possible modification

without notice, due to improvements.

(Hex wrench)

x 1

Published by Pioneer Corporation.

English