Pioneer PDP-S27-LR Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System głośników Pioneer PDP-S27-LR. Pioneer PDP-S27-LR 28 stron.
Również dla Pioneer PDP-S27-LR: Instrukcja serwisowa (4 strony)

Drukuj stronę

English

Thank you for buying this Pioneer product.

Please read through these operating instructions before

using your speaker system so you will know how to make

the most of its performance. After you have finished reading

the instructions, put them away in a safe place for future

reference.

WARNING: Handling the cord on this product or

cords associated with accessories sold with the

product will expose you to lead, a chemical known to

the State of California and other governmental

entities to cause cancer and birth defects or other

reproductive harm.

Wash hands after handling

BEFORE USE

÷ The nominal impedance of this speaker system is 8 ohms.

÷ In order to prevent damage to the speaker system

resulting from input overload, please observe the

following precautions:

÷ Do not supply power to the speaker system in

excess of the maximum permissable input. This

can result in damage or a possible fire hazard.

÷ When connecting or disconnecting pin-plugs, be

sure that amplifier power is OFF.

÷ When using a graphic equalizer to emphasize loud

sounds of a high frequency range, do not use

excessive amplifier volume.

÷ Do not force a low-powered amplifier to produce a

loud volume of sound (the amplifier's harmonic

distortion will be increased, and you may damage

the speaker).

÷ Please handle the speakers with sufficient care, as

the grille net and the cabinet can become damaged

or broken when they are subjected to strong external

impacts.

÷ Placing a CRT computer screen or CRT monitor near to

the speakers may result in interference or color distortion.

If this happens, distance the monitor from the speakers.

Notes on Installation Work:

This product is marketed assuming that it is installed by

qualified personnel with enough skill and competence.

Always have an installation specialist or your dealer install

and set up the product.

PIONEER cannot assume liabilities for damage caused

by mistake in installation or mounting, misuse,

modification or a natural disaster.

CHECKING THE ACCESSORIES

7 Speaker cable x 2

7 Speaker mounting fittings

For top right side x 1

7 Speaker mounting bolts

Flat countersunk head screw x 4

D36-P4_En

Hexagon socket head screw x 4

7 Mounting tool (Hex wrench)

7 Operating Instructions

NOTE:

÷ Always use the accessory mounting fittings for

installation.

÷ When screws other than those enclosed as accessories

are used to install the speakers, the speakers may drop

off or accidents may be caused. Always use the screws

enclosed as accessories.

INSTALLATION ON THE PLASMA

DISPLAY

Perform installation according to the following steps 1 to 2.

1 Attach the mounting fittings to the

speakers.

The illustration shows the right speaker.

For top side

Flat countersunk

head screw

For top left side x 1

For bottom x 2

Mounting plate

1 The top side fittings are dif-

ferent for the right and the

left side, and they must be

matched correctly.

2 Install the mounting fittings

with bolts at the positions

shown in the figure on the

left.

For bottom