Pioneer S-L8-LRW XE Instrukcja obsługi - Strona 39

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System głośników Pioneer S-L8-LRW XE. Pioneer S-L8-LRW XE 48 stron. Stereo cd receiver; speaker system; stereo cassette deck
Również dla Pioneer S-L8-LRW XE: Instrukcja serwisowa (3 strony)

Drukuj stronę

The 'on' time is whatever was

last set for the wake-up timer

Adjust it to what you want.

Remember: the time is

displayed as a 24-hour clock

The 'off ' time is automatically

set to an hour later than the

'on' time

Adjust it to what you want

Cancelling the Wake Up Timer

Tip

Although you can't di-

rectly edit the wake-up

settings once they're

made, if you cancel the

wake-up timer then set

it again, the previous

settings will show up in

the display.

If the clock and sunrise

indicators are lit, then when

you press

...

SET

...the wake-up timer is

cancelled

Set the time to switch on.

First, set the hour:

Use the $ and › buttons to change the flashing hour display, then

press

SET

Next, set the minute:

Use the $ and › buttons to change the flashing minute display,

then press

SET

Set the switch off time.

Set the hour:

Use the $ and › buttons to change the flashing hour display, then

press

SET

Next, set the minute:

Use the $ and › buttons to change the flashing minute display,

then press

SET

After pressing

, the display shows you the settings you've just made,

SET

including the switch on and off times, the component, and the volume level.

The clock and sunrise symbols in the display indicate that the wake up timer

is active.

Note: for the wake-up timer to work, the system must be in standby mode,

so remember to switch the system off before going to sleep. (In standby mode

you can check the timer settings by pressing

The wake-up timer doesn't automatically cancel, since you may well want to have the

system switch on every morning at the same time, for example.

SET

AUX/CD-R

SOUND

STANDBY/ ON

Select WAKE-UP from the timer menu.

Remember: switch between timer menu options using the $ and ›

buttons; select the option by pressing

After pressing

, the timer indicator in the display goes out.

SET

8 Using the Timer

TIMER

DISPLAY

SET

TAPE

TIMER/

! —

REC

CHARACTER

CANCEL

SET

›

VOL

+ ⁄