Pioneer S-L9-A-LRW Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System głośników Pioneer S-L9-A-LRW. Pioneer S-L9-A-LRW 48 stron. Stereo cd receiver; speaker system; stereo cassette deck
Również dla Pioneer S-L9-A-LRW: Instrukcja serwisowa (3 strony), Instrukcja serwisowa (3 strony)

Drukuj stronę

Sub-woofer

Sub-woofer cable

CAUTION!

The speaker system is not

magnetically shielded. This

means that if the speakers are

placed very near a television

set or monitor, you may see

colour distortion in the pic-

ture. Move the speaker(s)

further away from the televi-

sion to solve the problem.

Do not connect any other

amplifier to this system. In

rare cases this may result in

smoke or fire.

Do not block the port open-

ing on the front of the

subwoofer.

If you wish to connect speak-

ers other than the ones sup-

plied, use only speakers with

a nominal impedance of be-

tween 6 and 1 6 (the sub-

woofer should be 4 ). Refer

to the instructions that came

with your speakers if you are

unsure of their impedance

before connecting them and

switching on.

Right speaker

Speaker cable

Connecting the speakers

The S–L8/S–L9/S–L9-A speaker system consists of two compact satellite speakers that

deliver the middle and treble frequencies, and a subwoofer that provides powerful bass.

When connecting or disconnecting speakers, make sure that the power is switched off

and the unit unplugged from the wall outlet.

To get the best sound from the system, it's important that the red (+) and black (–)

speaker terminals on the CD receiver are connected to the corresponding terminals on

each speaker. To help you match up the terminals correctly, the supplied speaker cable

is colour coded: connect the white half of the cable to the black (–) terminals, and the

grey striped half to the red (+) terminals.

Speaker terminal connectors

Note: Make sure that the bare speaker wires cannot touch each other, or come

into contact with other metal parts once the unit is switched on.

Twist the exposed wire

strands together.

2 Installing and Connecting Up

Pull open the tab and

insert the twisted wire fully

into the terminal.

Left speaker

Snap the tab shut again

to secure the speaker

cable.