Pioneer SX-X360 Instrukcja obsługi - Strona 28

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System głośników Pioneer SX-X360. Pioneer SX-X360 35 stron. 5.1ch surround system

Drukuj stronę

Other connections

Automatic plasma display input switching

In order that the plasma display can switch automatically

to the correct input when you switch the input function of

the receiver subwoofer, you need to tell it how your

system is connected.

For example, if you connected your DVD recorder to the

DVD/DVR input on the receiver subwoofer, and to input

2 on your plasma display, select the DVD PDP2 setting

here so that when you switch the input function of the

receiver subwoofer to DVD/DVR to watch your DVD

recorder, the plasma display will automatically switch to

input 2.

For each receiver subwoofer input function (XBX (Xbox

360), DVD (DVD/DVR), DIG (DIGITAL), ANA (ANALOG))

you can select:

• NONE – does not switch the plasma display input

• PDP1 to PDP5 – switches the plasma display input to

one of the numbered inputs (1 to 5)

• TVTN – switches the plasma display to its built-in TV

tuner

Note

• The number of video inputs available will depend on

the plasma display you've connected.

• The PDP5 input may be called 'PC Input' (or similar)

on your plasma display.

• The SR+ setting remains in effect even in standby.

• The SR+ setting does not affect the FM/AM tuner

function.

Using the SR+ mode with a Pioneer plasma

display

Press SR+ on the remote.

Use

(cursor left/right) to select SR+ ON

then press ENTER.

• The SR+ setting is maintained even after switching

the receiver subwoofer into standby then back on.

Automatic muting and input switching will be

effective when the receiver subwoofer is switched on.

• If you disconnect the SR+ cable or switch the plasma

display off while SR+ is on, the SR+ ON setting

remains.

• To switch to SR+ OFF, follow steps 1 and 2, selecting

SR+ OFF.

Note

• You can control this unit with the plasma display's

remote sensor even in standby, but you can't control

this unit with either this unit's remote sensor or the

plasma display's remote sensor when the plasma

display is switched off (AC off) and the SR+ cable is

connected to the CONTROL IN jack of this unit.

About the control out jack

Many Pioneer components have SR CONTROL jacks

which can be used to link components together so that

you can use just the remote sensor of one component.

When you use a remote control, the control signal is

passed along the chain to the appropriate component.

Note that if you use this feature, make sure that you also

have at least one set of analog or coaxial digital audio

jacks connected to another component for grounding

purposes.

•

Connect the CONTROL IN jack on another Pioneer

component to the CONTROL OUT jack on the

receiver subwoofer.

This will allow you to control the other component (such

as a DVD player in a cabinet) by pointing its remote at the

display unit supplied with this receiver subwoofer.

• You can also connect this receiver subwoofer to your

plasma display as described above, in which case

you should point the remote at the plasma display to

control your DVD player, receiver subwoofer, and

plasma display.

Use a cable with a mono mini-plug on each end for the

connection.