Pioneer Elite PRO-1000HD Instrukcja obsługi - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Monitor Pioneer Elite PRO-1000HD. Pioneer Elite PRO-1000HD 44 stron. Pioneer 3rd, 4th % 5th generations plasma panel quick reference parts lists
Również dla Pioneer Elite PRO-1000HD: Skrócone listy referencyjne części (12 strony)
Drukuj stronę
About the Input Connectors on this
Unit
Consult the following chart when making connections to
a plasma display (pages 9 to 15).
Input Connector
INPUT
Connected
component and signals
Analog RGB
Component video
S video
Composite video
Analog RGB
S video
Composite video
*1 Although INPUT1/INPUT2 are compatible with various kinds
of signals, setup using the on-screen menu is necessary after
connections are made in order match the characteristics of
the source component (pages 18 and 19).
*2 INPUT1 is compatible with Microsoft's Plug & Play (VESA
DDC 1/2B).
*3 Depending on the video output board of the computer, this
type of connection may not be possible.
Connection to INPUT1 and INPUT2
Various components can be connected to the INPUT1 and
INPUT2 terminals. After connections are made, on-screen
setup is necessary to match the characteristics of the
connected component. Please see pages 18 and 19 for
on-screen setup after connection.
INPUT2 terminal
[ON SYNC]
Output source
G
Video component/
G ON SYNC
Personal
computer (PC)
G
with RGB output
G
Video component
with component
Y
video output
: Do not connect anything.
Note
Components compatible with INPUT1 are also compatible with
INPUT2.
When making connections to INPUT1, please refer to
supplement 3 on page 39.
For the screen sizes and input signals that
INPUT1 and INPUT2 are compatible with, please
refer to supplement 1 (pages 37 to 38) and
supplement 2 (page 39).
INPUT
INPUT
INPUT
*1
*1
1
2
3
4
*2
*3
*3
[H/V SYNC]
B
R
HD
VD
B
R
B
R
H/V SYNC
B
R
HD
VD
C
/P
C
/P
B
B
R
R
: Connect to this jack.
Installation and Connections
Connection to AV components
Connection to AV component that has
component video jacks
Make component video connections for AV components
such as DVD and LD players or similar components with
component video output capability.
When connecting to INPUT1
INPUT1
OUTPUT
ANALOG RGB
(ANALOG RGB)
On-screen setup is necessary after connection.
Please see page 18.
When connecting to INPUT2
(ON SYNC)
INPUT2
(H/V SYNC)
G
B
R
HD
VD
Connect the Y signal to the G terminal, the C
the B terminal, and the C
/P
R
R
On-screen setup is necessary after connection.
Please see page 18.
75
2.2
Ô
k
/P
signal to
B
B
signal to the R terminal.
9
PRO-1000HD / PRO-800HD