Pioneer PDP 424MV Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Monitor Pioneer PDP 424MV. Pioneer PDP 424MV 39 stron. Pioneer 3rd, 4th % 5th generations plasma panel quick reference parts lists
Również dla Pioneer PDP 424MV: Broszura i specyfikacje (2 strony), Skrócone listy referencyjne części (12 strony)

Drukuj stronę

1. Troubleshooting

NOTE:

When you connect a computer to this monitor, use an RGB

cable including the ferrite core on both ends of the cable.

And regarding DVI and power cable, attach the supplied

ferrite cores. If you do not do this, this monitor will not

conform to mandatory FCC standards.

Attaching the ferrite cores:

Set the ferrite cores on both ends of the DVI cable (not

supplied), and both ends of the power cable (supplied).

Close the lid tightly until the clamps click.

Use the band to fasten the ferrite core (supplied) to the

DVI cable.

DVI cable (not supplied)

band

core (small)

Power cable (supplied)

core (large)

To avoid damage and prolong operating life:

1. Use only with 100-240V 50/60Hz AC power supply.

Continued operation at line voltages greater than 100-

240 Volts AC will shorten the life of the unit, and might

even cause a fire hazard.

2. Handle the unit carefully when installing it and do not

drop.

3. Set the unit away from heat, excessive dust, and direct

sunlight.

4. Protect the inside of the unit from liquids and small

metal objects. In case of accident, unplug the power

cord and have it serviced by an authorized Service

Center.

5. Do not hit or scratch the panel surface as this causes

flaws on the surface of the screen.

6. For correct installation and mounting it is strongly

recommended to use a trained, authorized dealer.

7. As is the case with any phosphor-based display (like a

CRT monitor, for example) light output will gradually

decrease over the life of a Plasma Display Panel.

8. To avoid sulfurization it is strongly recommended not to

place the unit in a dressing room in a public bath or hot

spring bath.

9. Do not use in a moving vehicle, as the unit could drop or

topple over and cause injuries.

10. Do not place the unit on its side, upside-down or with the

screen facing up or down, to avoid combustion or electric

shock.

Plasma monitor cleaning procedure:

1. Use a wiping cloth (attached) or a soft dry cloth to clean

the front panel and bezel area. Never use solvents such as

alcohol or thinner to clean these surfaces.

2. Clean plasma ventilation areas with a vacuum cleaner

with a soft brush nozzle attachment.

3. To ensure proper ventilation, cleaning of the ventilation

Recommendations to avoid or minimize phosphor burn-in:

Like all phosphor-based display devices and all other gas

plasma displays, plasma monitors can be susceptible to

phosphor burn under certain circumstances. Certain

operating conditions, such as the continuous display of a

static image over a prolonged period of time, can result in

phosphor burn if proper precautions are not taken. To protect

your investment in this plasma monitor, please adhere to the

following guidelines and recommendations for minimizing

Connector

the occurrence of image burn:

band

* Always enable and use your computer's screen saver

core (small)

* Display a moving image whenever possible.

* Change the position of the menu display from time to time.

core (large)

* Always power down the monitor when you are finished

If the plasma monitor is in long term use or continuous

operation take the following measures to reduce the

likelihood of phosphor burn:

* Lower the Brightness and Contrast levels as much as

* Display an image with many colors and color gradations

* Create image content with minimal contrast between light

* Avoid displaying images with few colors and distinct,

* Note: Burn-in is not covered by the warranty.

Contact your dealer for other recommended procedures that

will best suit your particular application needs.

CAUTION:

WHEN POSITIONING THIS EQUIPMENT ENSURE THAT

THE MAINS PLUG AND SOCKET IS EASILY ACCES-

SIBLE.

Information to User

Alteration or modifications carried out without appro-

priate authorization may invalidate the user's right to

operate the equipment.

WARNING:

Handling the cord on this product or cords associated

with accessories sold with the product will expose you

to lead, a chemical known to the State of California and

other governmental entities to cause cancer and birth

defects or other reproductive harm. Wash hands after

handling.

areas must be carried out monthly. More frequent cleaning

may be necessary depending on the environment in which

the plasma monitor is installed.

function during use with a computer input source.

using it.

possible without impairing image readability.

(i.e. photographic or photo-realistic images).

and dark areas, for example white characters on black

backgrounds. Use complementary or pastel color whenever

possible.

sharply defined borders between colors.