Pioneer PDP-50MXE20 Instrukcja uruchamiania - Strona 20

Przeglądaj online lub pobierz pdf Instrukcja uruchamiania dla Monitor Pioneer PDP-50MXE20. Pioneer PDP-50MXE20 46 stron. Pioneer flat panel television - plasma tv user manual

Drukuj stronę
Additional Information

Troubleshooting

What may at first seem to be an malfunction, may be
remedied with a quick check.
Please check to see if a warning is displayed on the
screen. If displayed, refer to the table below and check
the mode. If there is no display check to see if the
problem is listed on page 17. The problem may also be
caused by something other than this unit so please also
check the other components being used such as a video
deck. If the problem can still not be solved please consult
the dealer where this unit was purchased.
16
En
About the self diagnosis mode
Messages appear on the bottom of this unit's screen to
indicate operation or connection faults. After message
confirmation, check the condition of the unit.
ERROR MESSAGE
CAUTION
OUT OF RANGE
or
CAUTION
UNSUPPORTED SIGNAL
or
SIGNAL NG
WARNING
THERMAL ALERT
SHUT DOWN
WARNING
FAN FAILURE
SHUT DOWN
ERROR
INVALID KEY ENTRY
SHUT DOWN
REMEDY
¶ The current input signal is
not supported by the unit.
Check the Computer signal
compatibility table and
change the computer's
output signal setting
appropriately.
¶ Turn off main power.
¶ Is ambient temperature
above 40 °C?
¶ Remove any objects
blocking the cooling vents
on the Plasma Display.
¶ Cooling fan has
malfunctioned.
Immediately turn off
power, remove power plug
from its outlet, and consult
a Pioneer service center or
your dealer.
¶ An invalid operation has
been attempted. Check
input signals, connections
and other settings.
¶ Turn off main power, wait
for 1 to 2 minutes, then try
turning power on again. If
problem persists, remove
power plug from its outlet
and consult a Pioneer
service center or your
dealer.