Ariston LFC 3C26 W X Codzienny podręcznik referencyjny - Strona 13
Przeglądaj online lub pobierz pdf Codzienny podręcznik referencyjny dla Zmywarka Ariston LFC 3C26 W X. Ariston LFC 3C26 W X 25 stron.
Drukuj stronę
LOADING THE RACKS
UPPER RACK
(loading example for the upper rack)
ADJUSTING THE HEIGHT OF THE UPPER RACK
The height of the upper rack can be adjusted: high position to place bulky
crockery in the lower basket and low position to make the most of the
tip-up supports by creating more space upwards and avoid collision with
the items loaded into lower rack.
The upper rack is equipped with a Upper Rack
height adjuster (see figure), without pressing
the levers, lift it up by simply holding the rack
sides, as soon as the rack is stable in its upper
position. To restore to the lower position, press
the levers A at the sides of the rack and move the
basket downwards.
We strongly recommend that you do not ad-
just the height of the rack when it is loaded.
NEVER raise or lower the basket on one side
only.
FOLDABLE FLAPS WITH ADJUSTABLE POSITION
The side foldable flaps can be fold or
unfold to optimize the arrangement
of crockery inside the rack.
Wine glasses can be placed safely
in the foldable flaps by inserting
the stem of each glass into the
corresponding slots.
Depending on the model:
• to unfold the flaps there is
needed to slide it up and rotate
or release it from the snaps and
pull it down.
• to fold the flaps there is needed to rotate it and slide flaps down or
pull it up and attach flaps to the snaps.
Load delicate and light dishes:
glasses, cups, saucers, low salad
bowls.
LOWER RACK
For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids should
ideally be placed at the sides to avoid interferences with the spray arm.
The lower rack has tip-up supports which can be used in a vertical
position when arranging plates or in a horizontal position (lower) to
load pans and salad bowls easily.
(loading example for the lower rack)
CUTLERY BASKET
The basket is equipped with top grilles
for improved cutlery arrangement. The
cutlery basket should be positioned only
at the front of the lower rack.
Knives and other utensils with sharp ed-
ges must be placed in the cutlery basket
with the points facing downwards or they
must be positioned horizontally in the
tip-up compartments on the upper rack.
ZONE WASH 3D
Zone Wash 3D uses additional water jets
located both: in the lower and upper part of
the dishwasher (marked with orange color)
to wash more intensively heavily soiled items
by increasing water coverage on dishes.
Example: Load pots and casseroles facing
lower part of Zone Wash 3D components
and activate the Zone Wash 3D option on
the panel.
EN
5