Ariston LFS 215 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zmywarka Ariston LFS 215. Ariston LFS 215 12 stron. 60 hz
Również dla Ariston LFS 215: Instrukcja obsługi (48 strony), Instrukcja obsługi (12 strony), Instrukcja obsługi (48 strony)

Drukuj stronę

Troubleshooting

Whenever the appliance fails to work, check for a solution from the following list before calling for

Assistance.

Problem:

The dishwasher does not start.

No water drains out from the

dishwasher.

The dishwasher makes

excessive noise.

The dishes and glasses are

covered in a white film or

limescale deposits.

The dishes and glasses are

streaked or have a bluish tinge.

The crockery has not been

dried properly.

The dishes are not clean.

The dishwasher does not take

any water in/Tap shut-off alarm

(the Drying and End indicator

lights flash).

Water loading solenoid valve

malfunction alarm

(the Drying indicator light flash).

Water inlet hose alarm/Water

inlet filter blocked. (the

Washing, Drying and End

indicator lights flashes).

All manuals and user guides at all-guides.com

Possible causes / Solutions:

• The plug has not been insert ed into the electrical socket prop erl y, or there is

no po wer in t he house.

• The dishwash er door h as no t been shut prope rly.

• A delayed start has bee n program m ed (see Start-up and use).

• The dishwash er cycle h as not yet finished.

• The wate r inlet hose is bent (see Installation ).

• The drain duct is blocked.

• The filter is clogged u p with food residues.

• The dishes are rat tling again st each other or against the sprayer a rm s.

• An e xcessive am ount of foam has been produce d: the detergent has not

been m easured out corr ectly or it is not suitable for use i n dish washe rs (see

St art-up and use).

• The level of the refined salt is low o r t he dosa ge setting is not suited t o the

hard ness of the water (see Rinse aid a nd salt).

• The lid on th e salt dispenser is not closed properly.

• The rinse ai d has bee n used up or the d osage is t oo lo w.

• The crockery is m ade f rom non-stick m aterial.

• The rinse ai d dosag e is too high.

• A wash cycle wit hout a drying pro gram m e has been selected.

• The rinse ai d has bee n used up or the d osage is t oo lo w (see Rinse aid and

salt).

• The rinse ai d dispense r set ting is not high e nou gh.

• The racks are o verload ed (s ee Loading th e racks).

• The crockery has not bee n arrange d well.

• The sprayer arm s cannot m ove fre ely.

• The wash cycle is t oo gentl e (see Wash cycles).

• An e xcessive am ount of foam has been produce d: the detergent has not

been m easured out correctly or it is not suit able for use in dishwashers (see

St art -up and use).

• The lid on th e rinse ai d compart m ent has not been shut correctly.

• The filter is dirty or blocked (see Care and mainten ance).

• The refin ed salt level is lo w (see Rinse aid and salt).

• There is no water in the m ains supply.

• The wate r inlet hose is bent (see Installat ion).

• Turn o n the t ap and t he appliance will start aft er a f ew m inut es.

•

The appliance is locked because no action was taken when th e indicat or

lights were flashing. Switch of f the m achine using the ON/OFF butt on, t urn

on the tap a nd s witch t he machine back on af ter 20 seconds by p ressing the

sam e button. Re-programm e the m achine and restart the wash cycle.

• Switch off the app liance by pressing the ON/OFF butt on and s witch it back

on aft er a m inute. I f the alarm continues, shut off t he wa ter tap to elim inate

the risk of flooding, rem ove the plug from the elect rical socket and contact

Assistance.

• Switch off the appliance b y pressing th e ON/OFF butto n. Shut off the wat er

tap to elim inate the risk of flooding and rem ove the plug from the electrical

socket. Make sure the wate r inlet filter has not becom e blocked by vario us

im purities. (see "Care and maintena nce" c hapter).