AEORC RX244 Instrukcja obsługi

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odbiornik AEORC RX244. AEORC RX244 2 stron. Mini micro receiver (2ch with linear servo)

Thank you for choosing AEORC ultra-micro receiver, this receiver integrates 5A/1S brushed ESC and

with 2pcs linear servos, please read this document carefully before use.

Version selection

For RX24x series, now we have below 6 versions for choice, please understand the corresponding basic

functions according to the product you purchased.

RX242

RX244

RX245

RX247

RX244-T

RX245-T

Basic Data

Size：25*23*8mm

Weight：4g

Working voltage：3.5-5.0V

Servo plug：1.00Pin 3P JST

Power plug：1.25Pin 2P JST(51005)

Receiver interface definition

Combine receiver and transmitter

1.Turn on the transmitter and power the receiver. At this time, the receiver is in the state of confirming

the transmitter signal, and the LED light flashes slowly.

2. If the transmitter signal cannot be confirmed within 15 seconds, then enter the automatic frequency

matching mode, the receiver starts to search for the signal and perform frequency matching, and the

LED light flashes quickly.

3.If the frequency matching is successful, according to different types of remote transmitters , there will

be a variety of different LED light feedbacks, including but not limited to the following three LED light

flashing methods. Please confirm according to the actual remote control whether the frequency

matching is successful or not.

AEORC RX24x Series Mini Micro Receiver (2CH with Linear Servo)

Protocol

5A/1S Brushed ESC

S-FHSS

DSMX/2

FRSKY-D16

FRSKY-D8

DSMX/2

FRSKY-D16

2CH Linear Servo

√

Instruction Manual

TLEME Function

√