3Com EtherLink 3C905B-COMBO Skrócona instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Karta sieciowa 3Com EtherLink 3C905B-COMBO. 3Com EtherLink 3C905B-COMBO 15 stron. Etherlink pci network interface cards
Również dla 3Com EtherLink 3C905B-COMBO: Skrócona instrukcja obsługi (12 strony)

3Com EtherLink 3C905B-COMBO Skrócona instrukcja obsługi
rn_body.SML Page 9 Wednesday, June 9, 1999 7:56 AM
3 Click OK.
The Insert Disk dialog box appears.
4 Open the pull-down menu and select:
c:\windows\options\cabs
5 Click OK.
Files are copied.
If you are prompted for the EtherCD, click OK, make sure
that the drive letter of the CD-ROM drive (for example, d:\)
appears in the dialog box, and then click OK.
You are prompted for the Windows 98 CD.
6 Remove the EtherCD, insert the Windows 98 CD,
and then click OK.
Files are copied. You are prompted to restart the PC.
7 Remove the Windows 98 CD, and then click Yes to
restart the PC.
You must restart the PC to complete the installation.
The installation is complete. Go to the next section,
"Verifying Successful
NIC is properly installed.
After Windows restarts, double-click the Network icon
in the Windows Control Panel and make sure that
the correct configuration settings are selected for your
network environment. Contact your system administrator
for assistance.

Windows NT 4.0

To install the network driver:
1 Turn on the power to the PC.
2 Double-click the My Computer icon, then the
Control Panel icon, and then the Network icon.
The Network window appears.
3 Click the Adapters tab.
If networking has not been installed on your PC before,
Windows NT asks you if you want to install networking.
Click Yes. See the WINNT.TXT file located on the EtherCD
or your Windows NT documentation for instructions.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
Installing the Network Driver
Installation," to confirm that the
9