Aeotec AEOEZWA009 Podręcznik - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik dla Akcesoria Aeotec AEOEZWA009. Aeotec AEOEZWA009 7 stron.

Drukuj stronę
Aeotec AEOEZWA009 Podręcznik

Supported Command Classes

•
Binary Sensor Command Class, Version 2 (highest granted security level)
•
Configuration Command Class, Version 4 (highest granted security level)
•
Multilevel Sensor Command Class, Version 11 (highest granted security level)
•
Multi Channel Association Command Class, Version 3 (highest granted security level)
•
Association Group Information Command Class, Version 3 (highest granted security level)
•
Device Reset Locally Command Class, Version 1 (highest granted security level)
•
Z-Wave Plus Info Command Class, Version 2 (non-Secure)
•
Notification Command Class, Version 8 (highest granted security level)
•
Manufacturer Specific Command Class, Version 2 (highest granted security level)
•
Powerlevel Command Class, Version 1 (highest granted security level)
•
Firmware Update Meta Data Command Class, Version 5 (highest granted security level)
•
Battery Command Class, Version 1 (highest granted security level)
•
Wake Up Command Class, Version 2 (highest granted security level)
•
Indicator Command Class, Version 3 (highest granted security level)
•
Association Command Class, Version 2 (highest granted security level)
•
Version Command Class, Version 3 (highest granted security level)
•
Security 2 Command Class, Version 1 (highest granted security level)
•
Supervision Command Class, Version 1 (non-Secure)
•
Transport Service Command Class, Version 2 (non-Secure)

Explanation of Z-Wave specific terms

•
Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically
Gateways,Remote Controls or battery operated wall controllers.
•
Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors,
actuators and even remote controls.
•
Primary Controller — is the central organizer of the network. It must be a controller. There can be only
one primary controller in a Z-Wave network.
•
Inclusion — is the process of adding new Z-Wave devices into a network.
•
Exclusion — is the process of removing Z-Wave devices from the network.
•
Association — is a control relationship between a controlling device and a controlled device.
•
Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is
able to communicate.
•
Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its
capabilities and functions.