Ariston AURES PREMIUM+ Instrukcja montażu i obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja montażu i obsługi dla Podgrzewacz wody Ariston AURES PREMIUM+. Ariston AURES PREMIUM+ 25 stron. Instantaneous electric water heater
Drukuj stronę
temperature will go down, at "OFF" position, the water temperature will remain at inlet
temperature;
iii. In case some external factors (i.e. Inlet temperature, Inlet water flow, electricity fluctuation)
change, the product will not modulate the power and outlet temperature will be impacted
increasing or decreasing depending on the external changing.
4AURES PREMIUM+
a. Rotating the control knob the user gradually sets the Temperature to find the desired
shower condition and on the display he reads the temperature is going to set ;
a. Rotating clockwise the control knob the temperature gradually increases, reaching 45°C at
"Max" position;
b. Rotating anticlockwise the control knob the temperature gradually decreases till 32°C at
"Min" position. At "OFF" position, the outlet temperature will remain at inlet temperature;
c. In case some external factors (i.e. Inlet temperature, Inlet water flow, electricity fluctuation)
change, the product will modulate the power so that outlet temperature will remain con-
stant at setting temperature, guaranteeing the highest and stable comfort.
7. Select the preferred shower jet thanks to spray position lever on the shoer head.
8. The height and the direction of the shower holder are adjustable. Depress the release button and
slide the shower holder to the desired position. Move the shower head to the desired angle. A
ratchet mechanism in the shower holder.
9. Rotate the control knob to "OFF" position and turn off the product water supply valve before to
get out of the shower.
PUMP FUNCTIONING
(only for pump version models)
The pump is always on in the pump product version. The pump starts to work when the user switch-
es on the product and turns on the water supply valve.
DISPLAY
(only for AURES PREMIUM+ models)
On the display, the user reads the following info:
- Temperature setting when the product is
working properly;
- Co = Cold Shower when the product is set be-
tween
and MIN;
- Error codes if there is some failure, below error
code list for a quick diagnostic:
a. E1 = Current leakage error (show pict)
b. E2 = NTC error (show pict)
c. E3 = ELCB Hardware error (show pict)
d. E7 = Frequency error (show pict)
Anyway every time Error code appears on the dis-
play, contact the service agent for repair.
NEVER try to repair the unit by yourself.
7
EN