Aeotec MULTISENSOR 6 Podręcznik użytkownika - Strona 2
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria Aeotec MULTISENSOR 6. Aeotec MULTISENSOR 6 8 stron. Z-wave water and flood sensor
Również dla Aeotec MULTISENSOR 6: Podręcznik użytkownika (13 strony), Podręcznik (3 strony), Podręcznik (10 strony), Podręcznik użytkownika (13 strony)
Drukuj stronę
11/21/2017
Quick Start.
Power on Water Sensor 6.
Water Sensor 6 ships with its battery pre-installed but disconnected. To connect the battery;
1. Remove the battery tab by pulling it away from water sensor.
2. Press the sensor's Action Button; its LED will blink to indicate that the sensor is powered.
3. Secure Water Sensor 6's water proof cover using the screw provided in the package. On the rear of Water Sensor 6
you'll find 2 screw holes in opposing corners; one screw hole will not contain a screw. Insert the provided screw into
the empty hole and tighten it with a screw driver.
After securing the sensor plate your Water Sensor unit will have the waterproof rating of IP65.
Adding your Sensor to your Z-Wave Network.
https://aeotec.freshdesk.com/support/solutions/articles/6000171886-water-sensor-6-user-guide-
Water Sensor 6 user guide. : Aeotec by Aeon Labs
2/8