Dingo Tools 52CC Podręcznik użytkownika - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Trymer Dingo Tools 52CC. Dingo Tools 52CC 11 stron. Duo power plus
Również dla Dingo Tools 52CC: Podręcznik użytkownika (16 strony)
Drukuj stronęATTACHING BLADES
ATTACHING BLADES
3
2
1
Step 1
Remove top nut, top plate and
resting plate.
2
2
2
2
2
2
2
2
2
2
1
Step 4
Position 2 (top plate) onto assembly.
ATTACHING NYLON CUTTER AND BRACKET ONTO GUARD
STEP 1
Attach screw into nylon cutter and then screw onto splatter
cover which is the lower outer black part of the guard.
Position center of blade over raised
circular lip (fi tting into blade.)
Apply 1 (locking nut) and
turn anti-clockwise to lock into position
(whilst holding the screw driver through
outer and inner index hole on head.)
B
B
B
B
B
B
B
B
B
3
1
2
Step 2
2
2
2
2
2
2
2
1
1
Step 5
A
Apply hex screws into bracket and fi t bracket and hex screws
around pole into guard. Tighten until fi rm.
3
1
2
Step 3
Position 3 (bottom plate) onto assembly.
STEP 2
6