Aeotec AEOEZW116 Skrócona instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Przełącznik Aeotec AEOEZW116. Aeotec AEOEZW116 11 stron. Single nano switch with measuring
Również dla Aeotec AEOEZW116: Podręcznik (16 strony)
Drukuj stronę
Setting
1 - 2147483647
Parameter 120: Configure the external switch mode for S1.
Configure the external switch mode for S1.
Size: 1 Byte, Default Value: 0
Setting
0
1
2
3
Parameter 121: Configure the external switch mode for S2.
Configure the external switch mode for S2.
Size: 1 Byte, Default Value: 0
Setting
0
1
2
3
Parameter 122: Set the control destination for external switch S1
Set the control destination of the external switch.
Size: 1 Byte, Default Value: 3
Setting
1
2
3
Parameter 252: Lock/unlock configuration parameters
Lock/unlock configuration parameters.
Size: 1 Byte, Default Value: 0
Setting
0
1
Parameter 255: Reset the Nano Dimmer
Reset the Nano Dimmer to factory default.
Size: 4 Byte, Default Value: 0
Setting
0
1431655765
Technical Data
Description
The range of interval time is 1 to 2147483647.
Description
Enter automatic identification mode
Momentary push button mode
3 way switch mode
2-state switch mode
Description
Enter automatic identification mode
Momentary push button mode
3 way switch mode
2-state switch mode
Description
control the output loads of itself.
control the other nodes
control the output loads of itself and other nodes.
Description
Unlock
Lock
Description
Reset all configuration parameters to factory default setting
Reset to factory default setting and removed from the z-wave network