Aeotec AEOEZW132 Podręcznik - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik dla Przełącznik Aeotec AEOEZW132. Aeotec AEOEZW132 10 stron. Dual nano switch with power metering

Drukuj stronę
Aeotec AEOEZW132 Podręcznik
7-11-2020
Parameter 80: To set which notification would be sent to the associated devices (Group 1)
To set which notification would be sent to the associated devices (Group 1) when the state of Nano Dimmeru2019s load is changed.
Size: 1 Byte, Default Value: 0
Setting
0
1
2
3
Parameter 81: To set which notification would be sent to the associated nodes in association group 3
To set which notification would be sent to the associated nodes in association Group 3 when using the external switch 1 to switch the loads.
Size: 1 Byte, Default Value: 1
Setting
0
1
Parameter 82: To set which notification would be sent to the associated nodes in association group 4
To set which notification would be sent to the associated nodes in association Group 4 when using the external switch 2 to switch the loads.
Size: 1 Byte, Default Value: 1
Setting
0
1
Parameter 83: Configure the state of LED when it is in 3 modes
Configure the state of LED when it is in 3 modes (Energy mode, Momentary indicate mode, Night light mode)
Size: 1 Byte, Default Value: 0
Setting
0
1
2
Parameter 84: Set the ON/OFF time of the LED when it is in Night light mode.
Set the ON/OFF time of the LED when it is in Night light mode.
Size: 1 Byte, Default Value: 301991936
Setting
0 - 60
256 - 316
65536 - 65596
16777216 - 16777276
Parameter 86: Set appointment 1
Set the ON time of output load.
Size: 4 Byte, Default Value: 8327680
Setting
0 - 60
256 - 316
65536 - 65543
16777215
16777216
manual.zwave.eu/backend/make.php?lang=en&sku=AEOEZW132
manual.zwave.eu/backend/make.php?lang=en&sku=AEOEZW132
Description
Send Nothing
Send Hail CC
Send Basic CC report
Send Hail CC when using the manual switch to change the load state.
Description
Send Nothing
Send Basic Set CC
Description
Send Nothing
Send Basic Set CC
Description
Energy mode. The LED will follow the status (on/off).
Momentary indicate mode. When the state of Switch load changed, the LED will follow the status (on/off) of its
load, but the LED will turn off after 5 seconds if there is no any switch action.
Night light mode. The LED will remain ON state.
Description
The minute time of OFF
The hour time of OFF
The minute time of ON
The hour time of ON
Description
The minute value of ON time
The hour value of ON time
The day value (Mon to Sun)
Disable the setting.
Enable the setting.
4/10