Ariston 41-116-24 Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kocioł Ariston 41-116-24. Ariston 41-116-24 16 stron. Condensing wall hung system boiler

Drukuj stronę

Enabling one of the pre-set programmes

To activate one of the pre-set weekly programmes, proceed as

follows:

- press the M

button, on the display flash

enu

- turn the CH knob

to select

- press the M

button to access the parameters

enu

- turn the CH knob

in a clockwise direction until 105 appears

on the display

- press the M

button to access heating zone selection

enu

- turn the CH knob

and select "Heating Zone 1"or "Heating Zone 2"

(if present)

- press the M

button to confirm the selected zone

enu

- turn the CH knob

to select 106 "Pre-set Timers"

- press the M

button to access the pre-set programme

enu

- turn the CH knob

to select one of the available programmes

(e.g. "Pre-set Timer 2") see page 8 for pre-set information

- press the M

button to confirm the selection.

enu

- press the e

button to restore the normal display screen.

The pre-set timer programme may be applied in heating zones 1

and . Proceed as above, select pre-set zone for setting 105 "select

programming zone"

Displaying the selected pre-set programme

To display the selected programme, access menu 1 again as

indicated above and turn the CH knob

Timer function" appears.

Press M

button to access the selection of timers to be

enu

displayed. Turn the CH knob

(e.g. "Heating Zone 1").

Press the M

button again to confirm the selection; the

enu

programme will be shown on the display (see note).

To activate the programmedschedule, after exiting the menu, press the

CLOCK button; the

symbol will appear on the display.

bar

Inverno

Winter

Note: the zone relating to the timer programme is displayed via

the symbols located above the timer

selection zone 1 displayed

selection zone displayed

selection hot water displayed

Changing the pre-set programme

In order to adapt the schedule programming to your own

requirements, the pre-set programme may be modified.

Access menu 1 as described on the previous page, then turn the

CH knob until the day(s) for which you wish to modify the pre-set

programme is (are) displayed.

E.g. 109 "Saturday -> Sunday" can be modified as shown below.

TIME BAND I

between 00.00 and 07.00

TIME BAND II

between 07.00 and .00

TIME BAND III

between .00 and .59

000

menu100

until 104 "Display Zone

to select the relevant heating zone

OFF Period

ON Period

OFF Period

Press Menu/ok to enter modification mode.

The text "Move Cursor" appears on the display; use the CH knob

the cursor over the period of time to be modified.

The cursor flashes and the selected time is indicated on the clock

(in steps of 15 minutes).

bar

Press the c

button

until the text "OFF

lock

Period" appears.

To programme a further inactive heating

period (e.g. "OFF Period" to remove an hour from

the ON period between 06.00 and 07.00).

Turn the CH knob

to move the cursor to

the relevant schedule.

bar

Periodo OFF

OFF period

Besides the modification of the time band shown on the display,

the clock indicates the selected time in steps of 15 minutes.

Once the modification of the pre-set period is complete, press

the c

button

and select "On period" to programme another

lock

operating stage, in our example this is a single period between

bar

Periodi ON

ON period

07.00 and .00.

Turn the CH knob

to move the cursor to the relevant time (.00

in our example). The cursor, when moved, will make the entire ON

bar

Periodi ON

period visible.

After performing all the modifications press the M

confirm the schedule programming modification.

Then press the e

button to restore the normal display screen.

To activate the programmed schedule, after exiting the menu, press

the C

button ; the

symbol will appear on the display.

lock

If "OFF period" or "ON period" is selected, other periods may be entered

so that the programme is adapted to suit your own requirements,

even on a daily basis.

Daily programming may be modified by selecting the relevant day

(within menu 1) and entering new OFF periods and ON periods as

described above.

User's manual

to position

Muovi Cursore

Move Cursor

bar

Sanitario

ON period

button to

enu