Aeotec Smart Switch 6 Podręcznik użytkownika - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przełącznik Aeotec Smart Switch 6. Aeotec Smart Switch 6 12 stron.
Również dla Aeotec Smart Switch 6: Podręcznik (7 strony)
Drukuj stronęEnergy mode will allow the LED to follow the state of Smart Switch, when the switch is
on, the LED will be on, and while the switch is off, the current colour LED will be off and
then remain the purple colour of 10% brightness. Momentary indicate mode will
momentarily turn the LED on for 5 seconds then turn off after every state change in the
switch. Night light mode will allow the LED to be turned on and off during your selected
time of day you have configured for it.
Parameter 81 [1 byte dec] can be set to:
(0) Energy Mode
(1) Momentary Indicate Mode
(2) Night Light Mode
Advanced Security or Basic Security feature of your Smart Dimmer in Z-wave
network:
If you want your Smart Switch as a non-security device in Z-wave network, you just need to
press the Action Button once on Smart Switch when you use a controller/gateway to add/include
your Smart Switch.
In order to take full advantage of the Smart Switch functionality, you may want your Smart
Switch as a security device that uses secure/encrypted message to communicate in your Z-wave
network, so a security enabled controller/gateway is needed.
Pair in Advanced Security Mode:
Put your existing secure gateway into pair mode
During the pairing process, tap the Action button of the Smart Switch 6 twice within 1
second.