Dini Argeo HLD1500 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wagi Dini Argeo HLD1500. Dini Argeo HLD1500 13 stron. Laboratory scale, industrial weighing systems

Drukuj stronę

7.4 F3 CoM TRANSMISSION MODE

PRINTER PORT

One will be asked to select the port to be used, press MODE to select one of the suggested values:

S 232

RS232 port

S USB Not used in this application.

Select S 232 and press ZERO to confirm.

TRANSMISSION MODE

One will be asked to select the transmission mode, press MODE to select one of the suggested values:

P Prt

Manual transmission through the PRINT/M+ key.

P Cont continuous transmission with P Cont. protocol

P Auto Automatic transmission upon weight stability (when in totalisation mode).

WirELE Not used in this application.

Press ZERO to confirm.

BAUD RATE

One will be asked to select the baud rate, press MODE to select one of the suggested values: 600, 1200, 2400 4800,

9600. Press ZERO to confirm.

PRINTER TYPE

One will be asked to select the printer type, press MODE to select one of the suggested values:

enables the printing with ASCII printer (for example TPR).

LP-50

Non used in this application.

Select tP and press ZERO to confirm.

7.5 "tEcH" - SCALE CONFIGURATION

By pressing ZERO it's possible to access the scale configuration menu. One is asked to enter the password.

To enter the menu press the PCS, M+, and TARE keys, one after the other.

The display shows the first parameter, "P1 Lin".

IN CASE THE ZONE OF USE IS DIFFERENT FROM THE CALIBRATION ZONE ONE SHOULD:

Set the gravity acceleration value for the ZONE OF CALIBRATION, see P5 step.

Carry out the calibration as following described (P1 or P2 step).

Set the gravity acceleration value for the ZONE OF USER, see P5 step.

P1 Lin

CALIBRATION WITH DEFINED SAMPLE WEIGHTS

By pressing ZERO it's possible to access the calibration with defined sample weights. One is asked to enter the

password.To enter the menu press the M+, PCS, and % keys, one after the other.

The display shows "UNLOAD";

Empty the platter, after Stable indicator on the weight will be acquired automatically;

The display shows "L

Put the first sample weight, defined in the table below, on the scale and the stability indicator is on the weight will

be acquired automatically;

The display shows "L

Put the second sample weight, defined in the table below, on the scale and when the stability indicator is on the

weight will be acquired automatically;

The display shows "L

Put the thirdsample weight, defined in the table below, on the scale and when the stability indicator is on the

weight will be acquired automatically;

The indicator returns to weighing.

XXX";