Ariston ecoSYSTEM 27 RFFI Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kocioł Ariston ecoSYSTEM 27 RFFI. Ariston ecoSYSTEM 27 RFFI 12 stron. Microcondens

Reading the programmed switching times

Pressing the "Prog" key displays the programmed switching times until

the first free memory location appears in the display "– – : – –".

If you now press the "Prog" key once again, the number of free memory

Iocations will be displayed, e.g. "FR

occupied, the display "FR appears.

6.4Changing the programmed switching times

Press the "Prog" key repeatedly until the switching time you want to

change is displayed. You can now enter the new data. See point 4.3.

Notes on storing switching times:

If you end your entry of the switching times by pressing the "Prog" key,

then the switching time you have entered will be stored and the next

memory location displayed. Entry of further switching times is also car

ried out as described in point 4.3.

In addition, a complete switching command is stored automatically

after

around 90 seconds provided no other key is pressed. The time switch

then enters the automatic operating mode and displays the current time

again.

6.5Deleting individual switching times

Press the "Prog" key repeatedly until the switching time you wish to

delete is shown in the display. Then set to "– –" using the "h" or "m" key

and keep the "

ng time is now erased and the current time is displayed.

6.6 AM / PM time display

If you press the "+/-1h" and "h" keys at the same time, the time display

switches into the AM/PM mode (mostly used in English-speaking coun

tries).

6.7 Technical data

Connection

Switching capacity

Ambient temperature

Running reserve

Memory Iocations

Shortest switching time

Programmable

". If all memory locations are

" key pressed down for around 3 seconds. The switchi

see unit imprint

-10°C to +55°C

5 h at + 20°C

1 min.

every minute