Dini Argeo DGT4XDEVNET Skrócona instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Nadajnik Dini Argeo DGT4XDEVNET. Dini Argeo DGT4XDEVNET 17 stron. Digital weight transmitter with 4 channels
Drukuj stronę
8. Zeroing of the mechanic tare (pre-tare zeroing)
888888
div.deC
...
9
div.deC
0.Calib
This functionality allows to zero the weigh of the scale structure (e.g. empty silo, conveyor, etc.) without changing the calibration in
memory.
9. Calibration with sample weight
888888
div.deC
...
10
zero
div.deC
11
Span
1.
Unload the scale.
4.
Enter the
step, type the span
span
weight value and press
10. Diagnostic of the load cell µV/V
888888
div.deC
...
12
adC.v
i
With more channels connected, it's possible to scroll between channels with keys
Complete menu
at page 4
Zeroing of the pre-tare (or mechanical tare).
Zero point acquisition.
Sample weight acquisition.
2.
Enter the
zero point.
5.
Save adjustment (Press
to adjust.
many times until
appear, then press
It allows to verify signal of each channel. It must be included into the range 0 to 3 mV/V.
Signal have to be stable and it have to increase by increasing the weight on the scale.
step to adjust the
zero
key
message will
save?
to confirm).
7
QSG_ENG_DGT4X
3.
Load the scale with span weight.
and
.