Ariston EVK4 Series Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Hob Ariston EVK4 Series. Ariston EVK4 Series 16 stron. Electric built-in cooking hob

Installation procedure

Type EVK6..

• Only type EVP4, EVP2... ovens ﬁ tted with a cooling fan may

be installed underneath this cooking hob.

• Before installing an oven, the rear wall of the kitchen furniture

element should be removed in the area of the cooking hob

cutout. Furthermore, a gap of at least 6 mm should be left at

the front side.

• The worktop should be installed completely horizontally.

• The cutoff surfaces should be appropriately protected.

• Attach the fastening elements (4) with the supplied screws (4)

to the front and rear wall of the cooking hob and the worktop

cutoff.

• Connect the cooking hob to the power mains and gas supply

(see instructions for connecting a cooking hob on a power

network and gas supply).

• For screwing down the ﬁ xing clip it is not allowed to use

screws longer than 6,5 mm.

• Attach the supplied adhesive seal on the lower edge of the

cooking hob.

• Insert the cooking hob into he cutoff and press it heavily from

above towards the worktop.