Whirlpool 1CWTW4800YQ1 Instrukcja instalacji - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Spryskiwacz Whirlpool 1CWTW4800YQ1. Whirlpool 1CWTW4800YQ1 16 stron.
Również dla Whirlpool 1CWTW4800YQ1: Instrukcja obsługi i konserwacji (28 strony)
Drukuj stronę
When w asher islevel, usea9/16" or14mmopen-end or
adjustable wrench t oturn jamnuts counterclockwise
on
leveling feettightly against washer cabinet.
HELPFUL TIP:You may want t o prop washer with
wooden b lock.
Electrical
Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong,
Do not use an adapter.
Do not use an extension cord.
Failure to follow
these instructions can result in death,
fire, or electrical shock.
COMPLETE
XNS%ALLATXON
Check electrical requirements.
Be sure you have correct
electrical supply and recommended
grounding method.
Check that all parts are now installed. If there is an extra
part, go back through steps to see what was skipped.
Check that you have all of your tools.
Check that shipping materials were completely
removed from washer.
Check that water faucets are on.
Check for leaks around faucets and inlet hoses.
Remove protective film from console and any tape
remaining on washer.
Check that washer is plugged into a grounded
3 prong outlet.
Dispose of/recycle all packaging materials.
Read "Washer Use" in your Washer User Instructions.
To test and clean your washer, measure 1/2 of normal
recommended
amount of powdered or liquid detergent
and pour it into washer basket or detergent dispenser
(on some models). Close lid. Select any cycle. Start washer
and allow to complete full cycle.
16.
Plug into a grounded
3 prong outlet
8