Whirlpool 49 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Spryskiwacz Whirlpool 49. Whirlpool 49 14 stron. 5kg, 1000rpm fully integrated washing machine awo/d 049

Drukuj stronę

30110447GB.fm Page 9 Thursday, May 10, 2007 12:35 PM

Water supply hose(s)

If a supply hose shows a damage, replace it by a new hose of the

same type, available through our After-Sales Service or your

specialist dealer.

If your supply hose has a transparent hose coating (fig. "C"),

periodically check the colour of the transparent coating. If the

coating begins to turn red, this is an indication that the hose may

have a leak and should be replaced. Contact our After-Sales Service

team or specialist dealer to obtain a replacement hose.

Cleaning the mesh filter in the water supply hose(s)

1. Close the tap and loosen the inlet hose on the tap.

2. Clean the internal mesh filter and screw the water inlet hose back

onto the tap.

3. Now unscrew the inlet hose on the rear of the washing machine.

4. Pull off the mesh filter from the washing machine connection

with universal pliers and clean it.

5. Refit the mesh filter and screw the inlet hose on again.

6. Turn on the tap and ensure that the connections are completely

water-tight.

Black process 45.0° 100.0 LPI

Safety valve

inspection

window

GB 9