Whirlpool 7LSC9355BN0 Instrukcja obsługi i konserwacji - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Spryskiwacz Whirlpool 7LSC9355BN0. Whirlpool 7LSC9355BN0 26 stron. Whirlpool three speed automatic washer use and care guide

Drukuj stronę

Caring

for Your Washer

Proper care of your washer can extend its life. This section explains how to care for your

washer properly and safely.

Exterior

Interior

Cleaning

your washer

Wipe up detergent, bleach, and

Clean interior with 1 cup (250 mL) of

other spills with a soft, damp

chlorine bleach mixed with 2 cups (500 mL)

cloth or sponge as they occur.

of detergent. Run washer through a com-

Occasionally

wipe the outside

plete cycle using hot water. Repeat process

of the washer to keep it looking

if necessary.

like new.

NOTE: Remove hard water deposits using

Do not put sharp or metal

-l

objects in your washer. They

can damage the finish. Check

all pockets for pins, clips,

money, bolts, nuts, etc. Do not

lay these objects on your washer after

emptying pockets.

cleaners labeled as washer safe only.

Winter

storage

or moving

care

Install and store your washer where it will not freeze. Because some water may stay in the

hoses, freezing can damage your washer. If storing or moving your washer during freezing

weather, winterize it.

To winterize

washer:

To use washer again:

1. Shut off both water faucets.

1. Flush water pipes and hoses.

2. Disconnect and drain water inlet hoses.

2. Reconnect water inlet hoses.

3. Put 1 quart (1L) of R.V.-type antifreeze in

3. Turn on both water faucets.

the basket.

4. Reconnect power supply cord.

4. Run washer on a drain and spin setting

5. Run the washer through a complete cycle

(see page 11) for about 30 seconds to

with 1 cup (250 mL) of detergent to clean

mix the antifreeze and water.

out antifreeze.

5. Unplug the power supply cord.

Non-use

or vacation

care

You should operate your washer only when

you are at home. If you will be on vacation

or not using your washer for an extended

period of time, you should:

Unplug the power supply cord or turn off

Turn off the water supply to the washer.

This helps avoid accidental flooding (due

to a water pressure surge) while you

are away.

electrical power to the washer.