Whirlpool 7MWFC5090KC Instrukcja obsługi i konserwacji oraz instrukcja instalacji - Strona 14
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji oraz instrukcja instalacji dla Spryskiwacz Whirlpool 7MWFC5090KC. Whirlpool 7MWFC5090KC 40 stron. Smart all-in-one washer and dryer
Drukuj stronę
Using the Smart All-In-One Washer/Dryer
First wash cycle without laundry
Before washing clothes for the first time, set up the Load & Go™
bulk dispenser (see page 9). Choose the Regular (What to Wash)
and Quick (How to Wash) cycle and run it without clothes. Use
only HE detergent. This initial cycle serves to ensure the interior is
clean and the bulk dispenser is primed and ready for use before
washing clothes.
If using liquid HE detergent in both Dispenser 1 and Dispenser 2,
you will need to run a second cycle without laundry as indicated
above to prime Dispenser 2 and clean the interior. Using the
Tools button, make sure that Dispenser 1 is disabled when
priming Dispenser 2 for detergent.
1.
Sort and prepare your laundry
Sort items by recommended cycle, water temperature, and color-
fastness. Separate heavily soiled items from lightly soiled. Separate
delicate items from sturdy fabrics. Treat stains promptly and check
for colorfastness by testing stain remover products on an inside
seam.
IMPORTANT:
■ Empty pockets. Loose change, buttons, or any small
object can plug pumps and may require a service call.
■ Close zippers, fasten hooks, tie strings and sashes, and
remove non-washable trim and ornaments.
■ Mend rips and tears to avoid further damage to items
during washing.
■ Turn knits inside out to prevent pilling. Separate lint-takers
from lint-givers. Synthetics, knits, and corduroy fabrics will
pick up lint from towels, rugs, and chenille fabrics.
■ Do not dry garments if stains remain after washing, because
heat can set stains into fabric.
■ Always read and follow fabric care labels and laundry
product instructions. Improper usage may cause damage
to your garments.
14
2.
Load laundry into washer/dryer
1.1. Open the Washer & Dryer door, pulling it forward.
1.2. Put the clothes in the basket loosely. Do not overload the Washer/
Dryer and follow the recommendations of each program. For washing
and drying programs, or only drying, make sure that the clothes are
not compressed in the basket.
The nominal capacities (10,1 kg for washing and 6 kg for drying) are
stated based on a specific clothing load for testing. This load consists
of different items, the characteristics of which are specified by the
Ordinance of the Ministry of Development, Industry and Foreign Trade
- MDIC, No. 185 for washing and IEC 61121 for drying.
For a good performance of your Washer/Dryer, the volume of the
clothes also should be considered, as there are certain types of items
which, although light, are bulky and may fall below the declared
nominal capacity, such as, for instance, synthetic fabrics in general
and foam-filled items.
1.3. Close the Washer/Dryer door, pushing it firmly until you hear the
latch click shut. The door will remain closed during all wash and/or dry
cycles.
IMPORTANT:
■ After the entire washing and/or drying program is
completed, the door is automatically unlocked and can be
open to remove the clothes from the basket.
■ During the cycle, the door can only be opened if the START/
PAUSE button is pressed or if the program is canceled by
pressing the ON/OFF button.