Whirlpool 7MWFC5090KC Instrukcja obsługi i konserwacji oraz instrukcja instalacji - Strona 26
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji oraz instrukcja instalacji dla Spryskiwacz Whirlpool 7MWFC5090KC. Whirlpool 7MWFC5090KC 40 stron. Smart all-in-one washer and dryer
Drukuj stronę
2.
Rock washer/dryer to test foot contact
Grip washer/dryer from top and rock back and forth, making
sure all four feet are firmly on floor. Repeat, rocking washer/
dryer from side to side. If washer rocks, go to Step 3 and
adjust leveling feet. If all four feet are in firm contact with floor,
go to "Plug In Washer/Dryer."
3.
Adjust leveling feet
Jam nut
If washer/dryer is not level, use a 1/2" (13 mm) open-end or
adjustable wrench to turn jam nuts clockwise on feet until they
are about 1/2" (13 mm) from the washer/dryer cabinet. Then
turn the leveling foot clockwise to lower the washer/dryer or
counterclockwise to raise the washer/dryer. Recheck levelness
of washer/dryer and that all four feet are firmly in contact with
the floor. Repeat as needed.
26
4.
Tighten leveling feet
Jam nut
When washer/dryer is level and all four feet are firmly in
contact with the floor, use a 1/2" (13 mm) open-end or
adjustable wrench to turn jam nuts counterclockwise on
leveling feet tightly against washer/dryer cabinet.