Whirlpool 7MWTW1950EW Instrukcja obsługi i konserwacji - Strona 23

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Spryskiwacz Whirlpool 7MWTW1950EW. Whirlpool 7MWTW1950EW 33 stron. Top-loading washer
Również dla Whirlpool 7MWTW1950EW: Instrukcja instalacji (16 strony)

Drukuj stronę

Select soil level

Once you select a cycle, select the soil level by turning the

Nivel de Suciedad (Soil Level) knob to the desired setting.

Select Temperature

Once you select a cycle, select the desired wash temperature

by turning the Temperatura (Temperature) knob to the

appropriate setting based on your load. All rinses are cold.

Always read and follow fabric-care label instructions to avoid

damage to your garments.

Temperature

Caliente (Hot)

Some cold water is added to save

energy. This may be cooler than

your hot water heater setting.

Tibia (Warm)

Some cold water will be added, so

this may be cooler than what your

previous washer provided.

Semifría (Cool)

Warm water is added to assist in

soil removal and to help dissolve

detergents.

Cool is slightly warmer than Cold.

Fría (Cold)

This is the temperature from your

faucet. If your tap water is very

cold, warm water may be added to

assist in soil removal and to help

dissolve detergents.

Suggested Fabrics

Whites and pastels

Durable items

Heavy soils

Bright colors

Moderate to light soils

Colors that bleed

or fade

Light soils

Dark colors that

bleed or fade

Light soils

Select cycle options, if desired

If you would like to add an Enjuague Adicional (Extra Rinse)

to most cycles or use the Llenado Profuno (Deep Fill) option,

turn the appropriate knob to Sí (On).

10.

Press INICIO/PAUSA (START/

PAUSE) to begin wash cycle

Close the Lid. Press the Inicio/Pausa (Start/Pause) button to

start the wash cycle. When the cycle has finished, the Listo

(Done) indicator will light. Promptly remove garments after

cycle has completed to avoid odor, reduce wrinkling, and

prevent rusting of metal hooks, zippers, and snaps.

Unlocking the Lid to Add Garments

If you need to open the lid to add 1 or 2 missed garments:

Press Inicio/Pausa (Start/Pause). The lid will unlock once

washer movement has stopped. This may take several

minutes if the load was spinning at high speed. Add

garments, close lid, and press Inicio/Pausa (Start/Pause)

again to restart the cycle.

If lid is left open for more than 10 minutes, the water will

pump out automatically.