Whirlpool 8MWTW2024 Instrukcja obsługi i konserwacji - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Spryskiwacz Whirlpool 8MWTW2024. Whirlpool 8MWTW2024 44 stron. Top-loading high efficiency washer
Również dla Whirlpool 8MWTW2024: Instrukcja obsługi i konserwacji (41 strony)
Drukuj stronę
11 Manual selection of the washing stages
This option allows you to select a manual cycle (one or more
stages of the selected automatic cycle) or even add a Soak to the
selected cycle.
HOW TO ADD SOAK TO AN AUTOMATIC CYCLE
-
Turn the knob to the automatic cycle that you want to select.
-
Push the button Select the washing stages.
-
You will notice that the Soak light turn on.
-
Select the desired cycle.
-
Press the Start/Pause (Inicio/Pausa) to start the cycle.
NOTE:
In this option the duration of soaking is predetermined at 1
hour. If you want to change the duration, use the "Soaking"
button your console.
If you want to cancel this option, before starting the cycle,
Press the "Selected Washing Stages" button until the
soaking option is off and the lights are displayed in the
09-Feb-2018 07:28:55 EST | RELEASED
(Select the washing stages)
In some European factories the letter "W" of the part code mentioned herein will be automatically
following manner:
HOW TO SELECT A MANUAL CYCLE
-
Turn the knob to the automatic cycle that you want to select.
-
Push the Select the washing stages button.
-
Select the desired cycle until the desired stages have been
selected.
You can choose any of the following manual cycles:
Soak
Wash
Rinse – Drain / Spin
Drain / Spin
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
8