Whirlpool AWG 860 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Spryskiwacz Whirlpool AWG 860. Whirlpool AWG 860 14 stron.

WASHING PROGRAMME

Select the programme:

1. Check that the Programme Selector is on Stop.

2.Plug in the appliance.

3.Open the tap.

4.Set the Programme Selector to the desired programme.

5. Depending on model, set the Temperature Selector knob to the desired temperature.

6. Depending on model, set the Spin Speed Selector knob to the desired spin speed.

7. Select the options desired by pressing the corresponding buttons.

By a further pressing of the button this option can be turned off again.

8. Check that the door is well closed. Press the On/Off

Attention: During the selected washing programme the programme selector knob moves by steps

clockwise. Never force it in the opposite direction.

Door lock

The door locks automatically after the programme start until the end of the programme.

If the programme selector is moved to the Stop position or if the electricity supply is interrupted,

then the door is released after approximately two minutes.

In this case do not open the door: because hot water could come out of the door.

Programme end

The programme selector knob is at the stop position.

1. Press On/Off button

2.Cancel the special options by pressing the appropriate buttons.

3.Turn off the tap.

4.Wait for the door to unlock (about 2 minutes).

5. Open the door and unload the machine.

N.B.

Do not fully close the door but leave it ajar to allow the drum to dry out.

Changing programme

1. Press On/Off button

2.Select the new programme.

3.Press On/Off button

Do not add detergent for this programme.

Programme interruption or pause

To interrupt the running programme for a certain period and continue it at a later time:

1. Press On/Off button

2.Following the desired pause press the On/Off

Downloaded From WashingMachine-Manual.com Manuals

106

. The indicator light turns off

. The new program will re-start.

button. The indicator lamp

button again.

lights up.