Whirlpool AWG 874/D Skrócona instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Spryskiwacz Whirlpool AWG 874/D. Whirlpool AWG 874/D 4 stron.
Drukuj stronę3GB20103.fm Page 4 Wednesday, March 10, 2004 7:04 PM
Please read the Instructions Manual carefully before using your new washing machine
Programme selector
To select a programme, turn the knob.
The corresponding symbol will appear on the display.
To change the programme once the wash cycle has
started, turn the knob to "
programme.
When the knob is on "
display.
Start button
When you press this button, it lights up and the wash
cycle starts. At the end of the wash cycle the light will
turn off and END will appear on the display.
On/Off button
This button switches the washing machine on/off.
Changing or interrupting the programme during the wash cycle
Turn the programme selector to the
Select the new programme (with temperature), any options and
another spin speed if you want.
Press the "Start" button again. If the "On/Off" button is pressed, no
detergent has to added.
Cancelling a programme before the end
Turn the programme selector to the
Set the programme selector to programme setting "Drain/Spin.
Press the "Start" button to start the "Drain/Spin" cycle.
Display
Shows the wash cycle sequence.
Temperature
Programme
selector
Cotton
Cotton
Cotton
Synthetics
Synthetics
Synthetics short
Delicate
Wool
Handwash
Black process 45.0° 150.0 LPI
Quick Reference Guide
" and set the new
" three dashes blink on the
" "
position.
" "
position.
Power and water consumption data
Load
Water
Energy
(°C)
(kg)
(l)
(kWh)
90
3.5
49**
1.20
60
3.5
44
0.67
40
3.5
44
0.38
60
2.0
42
0.80
40
2.0
42
0.43
30
2.0
30
0.30
30
1.5
47
0.45
40
1.0
58
0.45
30
1.0
55
0.25
Options
Selecting any option the indication lights up .
When the combination of programme, additional options and
temperature is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are deselected
automatically.
Start Delay
Delays the start of the wash cycle by 1 to 16 hours.
Each time the button is pressed, the start of the wash
cycle is delayed by 1 hour.
Prewash
Only for heavily soiled laundry (e.g. sand, granular
dirt). Programmes with Prewash last approx. 15
minutes longer.
Intensive rinse button
More water and a longer time in rinse cycle is added.
The intensive rinse function is especially suitable for
areas with particularly soft water, for baby clothes
and to help people with allergies.
Easy Ironing
Can be used together with Cotton and Synthetic
programmes to make ironing easier.
Spin
Every programme has an automatic predefined
maximum spin speed.
Press the button to select a different spin speed.
If the spin speed "0" is selected, the final spin is
cancelled. The water is drained out only.
Quick wash
For quick, economical washes. Especially suitable for
small, lightly soiled loads. This option can be used
with Cotton and Synthetic programmes. Selecting this
function allows you to shorten the wash cycle time
depending on the temperature.
Note: reduce the detergent quantity.
Programme Duration
Prewash cycle increases programme duration
approx.
by approx. 15 minutes. Consumption values
(hours : minutes)*
were measured in normalized conditions in
compliance with Standard IEC 60 456.
1:56
Consumption data in the home may vary with
2:13
respect to the values in the table in relation to
the water supply pressure and temperature,
2:00
the load and the type of wash.
1:44
*
The remaining time display may differ from
1:34
the values given in the table since it
depends on the conditions of use in the
0:40
home.
0:53
** To reduce the water temperature, some
cold water is added at the end of the main
0:48
wash cycle, before the pump drains the
0:51
water out.
(We reserve the right to make technical modifications)
GB
5019 301 20103