Whirlpool AWI-1300 Instrukcja serwisowa - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Spryskiwacz Whirlpool AWI-1300. Whirlpool AWI-1300 39 stron.

Lint Filter

Much lint may be obtained according to the kind of

clothes to be washed and some of the lint may also

sticks to the clothes.

To minimize this possibility a lint filter is provided on

the upper part of the tub to filter the wash water as it

is discharged from the water channel. It is good to

use the lint filter during washing.

HOW TO REPLACE LINT FILTER

1 Pull the filter frame upward.

2 Turn the lint filter inside out, and wash the lint off with water.

3 Return the filter as it was, and fix the filter frame to the slot.

When the START/HOLD button is pressed, the residual time (min.) is displayed on the time indicator, and it will be

counted down according to process.

When operation is finished, the TIME INDICATOR will light up

STRUCTURE

Pull

Loosen

FUNCTIONAL PRINCIPLE

1 When the DRAIN MOTOR connected to the power source, the DRAIN MOTOR rotates with 900 r.p.m and

revolves the pulley by gear assembly for reducing.

2 When the pulley is rotated, the pulley winds the wire to open the drain valve.

3 Therefore, rotation of pulley changed to the linear moving of wire.

4 The wire pulls the brake lever of Gear Mechanism Ass'y within 5 seconds.

5 After the wire pulled, gear assembly is separated from motor and condition of pulling is held by operation of the

lever.

6 When the power is turned off, the drain valve is closed because the wire returns to original position.

Filter

Bleach

Bleach Inlet

Inlet

Pulley

Lever

Inductive ring

Magnet

Coil of motor

Magnet of motor

Pulsator

EXPLANATION