Whirlpool AWM 6120 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Spryskiwacz Whirlpool AWM 6120. Whirlpool AWM 6120 22 stron. Front-loading washer
Również dla Whirlpool AWM 6120: Instrukcja serwisowa (19 strony)

Drukuj stronę

WASHING PROGRAMME

Selecting the programme:

1.Plug in the appliance.

2.Turn on the water supply tap.

3.Set the Programme Selector knob to the desired programme.

4.Select additional options, if desired, pressing the corresponding button.The indicator lights up.

By a further pressing of the button this option can be turned off again.

5.Press the "Start/Pause" button.

The indicator light will come on and the programme duration is shown on the display (if available).

The indicator lamps show the sequence reached in the programme. After starting the programme, the

sequence indication runs from left to right through Wash, Rinse, Spin.

When the sequence of the programme is finished the corresponding lamp goes out.

Options (depending on model)

Easy Ironing

• Can be used together with Cotton and Synthetics programmes to make ironing

easier.

• Increases the water quantity and the clothes are spun very gently.

• Increases the programme time and reduces the temperature. This reduces energy

Energy save/

Eco

consumption by about 30% without compromising the excellent results of the

wash.

Prewash

• Only for heavily soiled loads (for example sand, granular dirt) sensible. The cycle

time increases approximately 15 min.

Quick wash /

• Select for quick, economical washes.

Rapid

• Especially suitable for small, lightly soiled loads.

Note: If "Quick wash" is selected, only the "Rinse Hold" and "Spin speed reduction"

Intensive

• More water and a longer time in rinse cycle is added.

Rinse

• The intensive rinse function is especially suitable for areas with particularly soft

water, for baby clothes and to help people with allergies.

• The laundry remains in the last rinse water without being spun, to avoid heavy creasing.

Rinse hold /

Spin delay

• Especially suitable for the "Synthetics" or "Delicates" programmes, if the laundry

is not to be unloaded immediately after the end of the programme. This function

is particularly useful if you want to postpone spinning to a later time or when you

do not wish to spin the clothes.

Note: The programme stops to "Rinse Hold" at the time the "Rinse Hold" light in the

Continuing wash cycle after rinse hold:

• Press the Rinse hold button again; the load will be spun according to the selected

programme.

• If you do not wish to spin the clothes, turn the programme selector knob to the

drain programme and press the "Start/Pause" button

Spin speed

• Press this button to reduce the predetermined automatic maximum spin speed. In

reduction

some programmes the maximum final spin speed is limited to go easy on your

laundry items. Selection of a higher spin speed is not possible.

• With the "Cotton" and "Synthetics" programmes a short spin cycle is provided in any case,

even if the exclusion has been selected, in order to optimize rinsing results.

• If the spin speed "0" is selected, the final spinning is cancelled. The water is

drained out only.

options can be activated.

programme flow indication is on.