Whirlpool WASHER Instrukcja obsługi i konserwacji - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Spryskiwacz Whirlpool WASHER. Whirlpool WASHER 40 stron. Washing machine
Również dla Whirlpool WASHER: Instrukcja instalacji (16 strony), Instrukcja instalacji (27 strony), Instrukcje użytkownika (8 strony), Instrukcje użytkownika (20 strony), Instrukcje użytkownika (24 strony), Instrukcje użytkownika (8 strony), Instrukcja instalacji (20 strony), Instrukcje użytkownika (15 strony), Instrukcja instalacji (16 strony), Instrukcje użytkownika (8 strony), Wykres programu (2 strony), Instrukcje instalacji (5 strony), Instrukcja instalacji (8 strony)

3. Next, loosen the two locking screws "A" and remove the two

bars "B," as illustrated below. Keep the transport bolts,

screws, spacers and bars for future use.

A Screws (2)

B. Transport bars (2)

4. Plug the holes with the 4 clear plastic plugs and 2 black

plastic plugs, packed inside the parts bag.

NOTE: If the washer is to be transported at a later date, call your

local service center.

Drain System

The washer can be installed using the standpipe drain system

(floor or wall), the laundry tub drain system, or the floor drain

system. Select the drain hose installation method you need. See

"Tools and Parts."

Standpipe drain system - wall or floor (views A & B)

The standpipe drain requires a minimum diameter standpipe of

2" (5 cm). The minimum carry-away capacity can be no less than

4.2 gal. (15.9 L) per minute. A 2" (5 cm) diameter to 1" (2.5 cm)

diameter standpipe adapter kit is available. See "Tools and

Parts."

The top of the standpipe must be at least 23.5" (59.7 cm) high

and no higher than 72" (183 cm) from the bottom of the washer.

Laundry tub drain system (view C)

The laundry tub requires a minimum carry-away capacity of

4.2 gal. (15.9 L) per minute.

The top of the laundry tub must be at least 23.5" (59.7 cm) above

the floor and no higher than 72" (183 cm) from the bottom of the

washer.

Floor drain system (view D)

The floor drain system requires a siphon break that may be

purchased separately. See "Tools and Parts."

The siphon break must be a minimum of 28" (71 cm) from the

bottom of the washer. Additional hoses might be needed.

The minimum carry-away capacity can be no less than 4.2 gal.

(15.9 L) per minute.

(59.7 - 88.9 cm)

Proper connection of the drain hose will help protect your floors

from damage due to water leakage. To prevent the drain hose

from coming off or leaking, it must be installed according to the

following instructions.

IMPORTANT: To ensure proper installation, this procedure must

be followed exactly.

23.5 - 35"

(59.7 - 88.9 cm)

23.5 - 35"