3Com 3C433279A Uwaga dotycząca wydania - Strona 10
Przeglądaj online lub pobierz pdf Uwaga dotycząca wydania dla Sprzęt sieciowy 3Com 3C433279A. 3Com 3C433279A 12 stron. Superstack ii remote access system 1500
Drukuj stronę10
R
N
S
ELEASE
OTES
UPER
Modifying DLCI
Changing Datalink
S
® II R
A
TACK
EMOTE
CCESS
The Digital (Data) Link Connection Identifier (DLCI) of a Frame Relay user,
cannot be modified directly from the LAN-to-LAN and Shared ISP pages
of the RAS 1500 Web Configurator. To modify the DLCI, you must use the
CLI.
Perform the following steps to change the DLCI:
a) Go to the CLI and delete the existing PVC and the user using the
following CLI commands:
RAS1500>DISABLE USER <USERNAME>
RAS1500>DISABLE FRAME_RELAY PVC <PVC NAME>
RAS1500>DELETE USER <USERNAME>
RAS1500>DELETE FRAME_RELAY PVC <PVC NAME>
b) Through the Web Configurator, add an entry in the LAN-to-LAN or the
Shared ISP page depending on your requirements, with the new DLCI.
This will add a PVC with the new DLCI.
RAS1500 allows you to have one datalink on the WAN interface, either
PPP or Frame Relay. You cannot modify a Frame Relay user to PPP Leased
Line or vice versa, in the modify mode in the LAN-to-LAN and Shared ISP
pages of the RAS 1500 Web Configurator. (The same holds true if you
want to change the datalink on the WAN interface from Frame Relay to
Leased Line or vice versa). To change the Datalink, you must use CLI.
Perform the following steps to change a Datalink:
a) Go to the CLI and delete the user.
If you are changing from Frame Relay to PPP Leased Line, use the
following CLI commands:
RAS1500>DISABLE USER <USERNAME>
RAS1500>DISABLE FRAME_RELAY PVC <PVC NAME>
RAS1500>DISABLE DATALINK FRAME_RELAY INTERFACE rm0/wan:1
RAS1500>DELETE USER <USERNAME>
RAS1500>DELETE FRAME_RELAY PVC <PVC NAME>
RAS1500>DELETE DATALINK FRAME_RELAY INTERFACE rm0/wan:1
If you are changing from PPP Leased Line to Frame Relay, use the
following CLI commands:
RAS1500>DISABLE USER <USERNAME>
S
1500 R
2.5
YSTEM
ELEASE